Investigating Copper Wire Bonding Technology in Chip-on-Board Applications

被引：0
|
作者：
Krammer, Oliver [1 ]
Roka, Peter [1 ]
Jakab, Laszlo [1 ]
机构：
[1] Budapest Univ Technol & Econ, Dept Elect Technol, Budapest, Hungary
来源：
2013 PROCEEDINGS OF THE 36TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE) | 2013年
关键词：
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
In our experiment, the possibility of forming copper wire bonds in Chip-on-Board (COB) applications was investigated. In the experiment, such surface finishes were studied and compared which are common in printed circuit board based COB applications and can be bonded with wire bonding technologies. These finishes were immersion silver (ImAg), electroless nickel / immersion gold (ENIG) and electroless nickel / electroless palladium / immersion gold (ENEPIG). On each type of surface finish, copper wires with two diameters (33 and 300 mu m) were bonded with a TPT Ultrasonic bonder. The wire bonds then characterized by optical inspections and mechanical measurements which are detailed in the paper.
引用
收藏
页码：94 / 98
页数：5
相关论文
共 50 条
  • [21] Fabrication and qualification of coated chip-on-board technology for miniaturized space systems
    Maurer, RH
    Le, BQ
    Nhan, E
    Lew, AL
    Darrin, MAG
    EECC'97 - PROCEEDINGS OF THE THIRD ESA ELECTRONIC COMPONENTS CONFERENCE, 1997, 395 : 199 - 204
  • [22] Status of NCMS chip-on-board project
    Janus, AR
    1997 INTERNATIONAL CONFERENCE ON MULTICHIP MODULES - PROCEEDINGS, 1997, : 177 - 180
  • [23] Chip-on-Board (CoB) technology for low temperature environments. Part I: Wire profile modeling in unencapsulated chips
    Jinka, K. K.
    Ganesan, S.
    Dasgupta, A.
    Ling, S.
    Shapiro, A.
    Schatzel, D.
    MICROELECTRONICS RELIABILITY, 2007, 47 (08) : 1246 - 1250
  • [24] THE DOOR IS OPENING FOR CHIP-ON-BOARD ASSEMBLY
    LYMAN, J
    ELECTRONICS, 1986, 59 (37): : 101 - 102
  • [25] PRACTICAL TECHNOLOGY OF COPPER WIRE BONDING
    TOYOZAWA, K
    OOMI, S
    MINAMIDE, S
    WAKAMOTO, S
    MAEDA, T
    SHARP TECHNICAL JOURNAL, 1989, (42): : 77 - 80
  • [26] Copper Wire Bonding - A Maturing Technology
    Appelt, Bernd K.
    Tseng, Andy
    Lai, Yi-Shao
    Chen, Chun-Hsiung
    2010 12TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC), 2010, : 479 - 483
  • [27] Use of microwave technology for rapid cure of chip-on-board glob top encapsulants
    Wei, JB
    Fathi, Z
    Pan, B
    Nah, CK
    Chan, SL
    PROCEEDINGS OF 3RD ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE, 2000, : 181 - 185
  • [28] Research Note: LED chip-on-board packaging technology for strict colour tolerance
    Zhang, J.
    Ge, P.
    Zhou, Z.
    Liu, D.
    Wang, H.
    Su, J.
    LIGHTING RESEARCH & TECHNOLOGY, 2017, 49 (08) : 1052 - 1057
  • [29] Chip-on-Board Bonding Using Non-Conductive Film and Metallic Bumps by the Surface Activated Bonding Method
    Wang, Ying-Hui
    Suga, Tadatomo
    IEEE 9TH VLSI PACKAGING WORKSHOP IN JAPAN, 2008, : 91 - 94
  • [30] Active cooling method for chip-on-board leds
    Bǎdǎlan, Niculina
    Svasta, Paul
    Marghescu, Cristina
    UPB Scientific Bulletin, Series C: Electrical Engineering and Computer Science, 2018, 80 (02): : 97 - 108
12345