Capability of LiTaO3/Quartz HAL SAW Resonators Confirmed by Simulation and Measurement

被引:8
|
作者
Kadota, Michio [1 ]
Ishii, Yoshimi [1 ]
Tanaka, Shuji [1 ]
机构
[1] Tohoku Univ, Grad Sch Engn, Sendai, Miyagi, Japan
来源
PROCEEDINGS OF THE 2019 JOINT CONFERENCE OF THE IEEE INTERNATIONAL FREQUENCY CONTROL SYMPOSIUM AND EUROPEAN FREQUENCY AND TIME FORUM (EFTF-IFCS 2019) | 2019年
关键词
SAW resonator; LiTaO3; quartz; impedance ratio; simulation; hetero acoustic layer; LT thickness;
D O I
10.1109/fcs.2019.8856040
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper reports hetero acoustic layer (HAL) surface acoustic wave (SAW) resonators using a thin LiTaO3 (LT) plate with negative TCF and a quartz substrate with positive TCF. In the previous study, a high impedance (2) ratio (82 dB), an excellent temperature coefficient of frequency (TCF: 2 ppm/degrees C), and spurious-free characteristic up to 14 GHz were demonstrated. In this study, two kinds of LT/ quartz HAL SAW resonators with different wavelengths of interdigital transducer (IDT) were fabricated, and measured results were compared with simulated ones. The measured bandwidths (BWs) roughly agreed with the simulated ones. Although many measured values of Z ratios are lower than the simulated ones, the best Z ratios among them are similar to the simulated ones. This result is reasonable taking account of the imperfectness of laboratory-level fabrication, and suggests that the simulation in this study well predicts the performance of real devices.
引用
收藏
页数:4
相关论文
共 50 条
  • [31] EQUIVALENT-CIRCUIT PARAMETERS FOR LITAO3 PLATE RESONATORS
    BURGESS, JW
    HALES, MC
    PORTER, RJ
    ELECTRONICS LETTERS, 1975, 11 (19) : 449 - 450
  • [32] LITAO3 AND LINBO3 STRIP-TYPE RESONATORS
    FUJIWARA, Y
    WAKATSUKI, N
    IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 1987, 34 (01) : 39 - 44
  • [33] Bandwidth-tunable Filter Consisting of SAW Resonators and BaSrTiO3 Varactors Directly Fabricated on a LiTaO3 Wafer
    Kimura, Tetsuya
    Kobayashi, Hideaki
    Kishimoto, Yutaka
    Kato, Hideyuki
    Inaba, Masahiro
    Hashimoto, Ken-ya
    Matsumura, Takeshi
    Hirano, Hideki
    Kadota, Michio
    Esashi, Masayoshi
    Tanaka, Shuji
    2014 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), 2014, : 795 - 798
  • [34] GROWTH OF LITAO3 SINGLE-CRYSTAL FOR SAW DEVICE APPLICATIONS
    FUKUDA, T
    MATSUMURA, S
    HIRANO, H
    ITO, T
    JOURNAL OF CRYSTAL GROWTH, 1979, 46 (02) : 179 - 184
  • [35] Temperature compensated SAW devices using bonded LiTaO3/sapphire
    Fujitsu Laboratories Ltd., 64 Nishiwaki, Ohkubo-cho, Akashi Hyogo 674-8555, Japan
    不详
    不详
    不详
    IEEJ Trans. Electron. Inf. Syst., 2007, 8 (1161-1165+4):
  • [36] Numerical calculation of SAW sensitivity:: application to ZnO/LiTaO3 transducers
    Powell, DA
    Kalantar-zadeh, K
    Wlodarski, W
    SENSORS AND ACTUATORS A-PHYSICAL, 2004, 115 (2-3) : 456 - 461
  • [37] ELASTIC-CONSTANTS AND TEMPERATURE COEFFICIENTS OF LITAO3 FOR SAW APPLICATION
    MUROTA, M
    SHIMIZU, Y
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1991, 30 : 156 - 158
  • [38] A LITAO3 SAW RESONATOR AND ITS APPLICATION TO VIDEO CASSETTE RECORDER
    EBATA, Y
    SATO, K
    MORISHITA, S
    IEEE TRANSACTIONS ON SONICS AND ULTRASONICS, 1982, 29 (03): : 171 - 171
  • [39] LOW SIDELOBE SAW CONTIGUOUS FILTERBANK USING MDC LITAO3
    HUBER, C
    LANE, J
    NEWMAN, BA
    GODFREY, JT
    GRAULING, CH
    MOORE, RA
    IEEE TRANSACTIONS ON SONICS AND ULTRASONICS, 1978, 25 (04): : 265 - 266
  • [40] Calculation of the saw-induced stress distributions in an electrode of a saw-device on LiTAO3
    Kubat, F
    Ruile, W
    Rösler, U
    Ruppel, CCW
    Reindl, LM
    2004 IEEE ULTRASONICS SYMPOSIUM, VOLS 1-3, 2004, : 437 - 440