Capability of LiTaO3/Quartz HAL SAW Resonators Confirmed by Simulation and Measurement

被引:8
|
作者
Kadota, Michio [1 ]
Ishii, Yoshimi [1 ]
Tanaka, Shuji [1 ]
机构
[1] Tohoku Univ, Grad Sch Engn, Sendai, Miyagi, Japan
来源
PROCEEDINGS OF THE 2019 JOINT CONFERENCE OF THE IEEE INTERNATIONAL FREQUENCY CONTROL SYMPOSIUM AND EUROPEAN FREQUENCY AND TIME FORUM (EFTF-IFCS 2019) | 2019年
关键词
SAW resonator; LiTaO3; quartz; impedance ratio; simulation; hetero acoustic layer; LT thickness;
D O I
10.1109/fcs.2019.8856040
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper reports hetero acoustic layer (HAL) surface acoustic wave (SAW) resonators using a thin LiTaO3 (LT) plate with negative TCF and a quartz substrate with positive TCF. In the previous study, a high impedance (2) ratio (82 dB), an excellent temperature coefficient of frequency (TCF: 2 ppm/degrees C), and spurious-free characteristic up to 14 GHz were demonstrated. In this study, two kinds of LT/ quartz HAL SAW resonators with different wavelengths of interdigital transducer (IDT) were fabricated, and measured results were compared with simulated ones. The measured bandwidths (BWs) roughly agreed with the simulated ones. Although many measured values of Z ratios are lower than the simulated ones, the best Z ratios among them are similar to the simulated ones. This result is reasonable taking account of the imperfectness of laboratory-level fabrication, and suggests that the simulation in this study well predicts the performance of real devices.
引用
收藏
页数:4
相关论文
共 50 条
  • [21] SAW VELOCITIES IN X-CUT LITAO3
    ANHORN, M
    ENGAN, HE
    IEEE 1989 ULTRASONICS SYMPOSIUM : PROCEEDINGS, VOLS 1 AND 2, 1989, : 363 - 366
  • [22] Achieving Ultimate Q-factors in SAW Resonators on Commercial LiNbO3 and LiTaO3 Substrates
    Zhgoon, Sergei
    Shvetsov, Alexander
    Antcev, Ivan
    Bogoslovsky, Sergei
    Sapozhnikov, Gennadiy
    Derkach, Mikhail
    2016 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), 2016,
  • [23] 使用LiTaO3单晶的SAW器件
    HitoshiHirano
    张传忠
    压电与声光, 1983, (04) : 68 - 77
  • [24] LiTaO3基片SAW传输的方位特性
    清水康敬
    郭秀芬
    压电与声光, 1981, (02) : 3 - 7
  • [25] LITAO3 CRYSTALS FOR COMMERCIAL SAW TV-IF FILTERS
    HIRANO, H
    FERROELECTRICS, 1980, 27 (1-4) : 151 - 156
  • [26] SAW用的LiTaO3单晶的生长
    张万鲲
    彭雪松
    赵昌勇
    陈新华
    压电与声光, 1982, (01) : 30 - 33
  • [27] SAW DEVICES UTILIZING LITAO3 SINGLE-CRYSTAL
    HIRANO, H
    FERROELECTRICS, 1982, 42 (1-4) : 591 - 602
  • [28] A study on shear wave LiTaO3 resonators for viscosity sensor
    Bannai, M., 1600, Japan Society of Applied Physics (42):
  • [29] A study on shear wave LiTaO3 resonators for viscosity sensor
    Bannai, M
    Wakatsuki, N
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 2003, 42 (5B): : 3093 - 3097
  • [30] Optimal orientations of LiTaO3 for application in plate mode resonators
    Naumenko, Natalya F.
    JOURNAL OF APPLIED PHYSICS, 2015, 118 (03)