The effects of melting technologies on the microstructures and properties of Nb-16Si-22Ti-2Al-2Hf-17Cr alloy

被引：40

作者：

Li, Xiaojian ^{[1
]}

Chen, Haifeng ^{[1
]}

Sha, Jiangbo ^{[1
]}

Zhang, Hu ^{[1
]}

机构：

[1] Beijing Univ Aeronaut & Astronaut, Dept Mat Sci & Engn, Beijing 100083, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2010年 / 527卷 / 23期

关键词：

Nb-Si based alloys; Induction melting; Induction skull melting; Microstructure; Mechanical property; Oxidation resistance; IN-SITU COMPOSITES; MECHANICAL-PROPERTIES; SILICIDE;

D O I：

10.1016/j.msea.2010.04.046

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

This paper deals with the effects of vacuum non-consumable arc-melting (VCAM), vacuum induction melting (VIM) and induction skull melting (ISM) technologies on microstructures, mechanical properties and oxidation resistance of Nb-16Si-22Ti-2Al-2Hf-17Cr alloy. It is revealed that the microstructure of the Nb-16Si-22Ti-2Al-2Hf-17Cr alloy is composed of Nb solid solution (Nb,Ti)(ss), silicide (Nb,Ti)(5)Si-3 and Laves phase NbCr2. The ISM ingots exhibit the finest microstructure, while the VCAM ingot shows the coarsest microstructure. Refined at 1800 degrees C for 10 min, the VIM ingot with a 0.1% carbon addition shows the best room temperature toughness of 9.05 MPa m(1/2) on average, however, the highest strength at 1250 degrees C was obtained on the ISM sample refined at technology parameters of 140 kw melting for 2 min + 160 kw melting for 3 min. In addition, oxidation resistance was greatly improved through the ISM technology compared with the VCAM technology. (C) 2010 Published by Elsevier B.V.

引用

页码：6140 / 6152

页数：13

共 50 条

[41] Effects of Cr addition on the microstructures and oxidation of Nb-Si-Al-Ti-W alloys [J].

Long, W. Y. ;

Jia, H. M. .

3RD INTERNATIONAL CONFERENCE ON NEW MATERIAL AND CHEMICAL INDUSTRY, 2019, 479

[42] Microstructure and properties of Nb-Si-Ti-Al-Hf-Cr alloys fabricated by spark plasma sintering [J].

Zhao, Dong-Yang ;

Liu, Wei ;

Sha, Jiang-Bo .

Cailiao Gongcheng/Journal of Materials Engineering, 2015, 43 (10) :20-27

[43] Characterization of Ti-48Al-2Cr-2Nb built by selective laser melting [J].

Mizuta, Kazuhiro ;

Hijikata, Yuta ;

Fujii, Tatsuya ;

Gokan, Kazuhiro ;

Kakehi, Koji .

SCRIPTA MATERIALIA, 2021, 203

[44] Microstructure and tensile properties of isothermally forged Ni-43Ti-4Al-2Nb-2Hf alloy [J].

Song, Xiao-Yun ;

Li, Yan ;

Zhang, Fei .

RARE METALS, 2013, 32 (05) :475-479

[45] Microstructure, texture and tensile properties of Ti-47Al-2Cr-2Nb alloy produced by selective electron beam melting [J].

Yue, Hangyu ;

Chen, Yuyong ;

Wang, Xiaopeng ;

Xiao, Shulong ;

Kong, Fantao .

JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 766 :450-459

[46] A study of the microstructures and oxidation of Nb-Si-Cr-Al-Mo in situ composites alloyed with Ti, Hf and Sn [J].

Geng, Jie ;

Tsakiropoulos, Panos .

INTERMETALLICS, 2007, 15 (03) :382-395

[47] Oxidation behaviour of the 47Nb 16Si 25Ti 8Hf 2Al 2Cr alloy sheet and vibrational spectroscopy [J].

Lefez, B. ;

Jouen, S. ;

Hannoyer, B. ;

Bacos, M-P. ;

Beucher, E. .

MATERIALS AT HIGH TEMPERATURES, 2009, 26 (01) :15-20

[48] Influence of oxygen on microstructure and mechanical properties of directionally solidified Ti-47Al-2Cr-2Nb alloy [J].

Ding, Hongsheng ;

Nie, Ge ;

Chen, Ruirun ;

Guo, Jingjie ;

Fu, Hengzhi .

MATERIALS & DESIGN, 2012, 41 :108-113

[49] Microstructure and mechanical properties of cast Ti-47Al-2Cr-2Nb alloy melted in various crucibles [J].

Wang Ligang ;

Zheng Lijing ;

Cui Renjie ;

Yang Lili ;

Zhang Hu .

CHINA FOUNDRY, 2012, 9 (01) :48-52

[50] Microstructure and mechanical properties of cast Ti-47Al-2Cr-2Nb alloy melted in various crucibles [J].

Wang Ligang .

China Foundry, 2012, (01) :48-52

← 1 2 3 4 5 →