Different procedures for the diagnosis of rotor fault in closed loop induction motors drives

被引:17
作者
Bellini, A. [1 ]
Concari, C. [2 ]
Franceschini, G. [2 ]
Tassoni, C. [2 ]
机构
[1] Univ Modena, DISMI, Reggio Emilia, Italy
[2] Univ Parma, DII, Parma, Italy
来源
IEEE IEMDC 2007: PROCEEDINGS OF THE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE, VOLS 1 AND 2 | 2007年
关键词
D O I
10.1109/IEMDC.2007.383638
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper deals with different procedures that can be applied to diagnose the severity degree of rotor faults in closed loop controlled induction machines. A solution based on Field Oriented Control (FOC) was investigated in order to validate the robustness of the diagnostic procedures towards the regulator parameters. Different diagnostic procedures were investigated, that rely on different diagnostic indexes. Specifically a few electric quantities are considered as possible fault alert signals: the spectral analysis of manipulated and controlled variables, the voltage homopolar components (voltage zero sequence), and the spectral analysis of motor input current due to a high frequency voltage injection. It turns out that the last quantity is a simple and effective index able to detect and quantify the fault severity degree. The procedures based on the above mentioned quantities are validated by experiments made with a DSP based Current Controlled Voltage Source Inverter (CCVSI) supplying an induction machine with three rotors in different health conditions.
引用
收藏
页码:1427 / +
页数:2
相关论文
共 19 条
  • [1] Bellini A., 1999, SDEMPED'99 Record. 1999 IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, P43
  • [2] Quantitative evaluation of induction motor broken bars by means of electrical signature analysis
    Bellini, A
    Filippetti, F
    Franceschini, G
    Tassoni, C
    Kliman, GB
    [J]. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2001, 37 (05) : 1248 - 1255
  • [3] Closed-loop control impact on the diagnosis of induction motors faults
    Bellini, A
    Filippetti, F
    Franceschini, G
    Tassoni, C
    [J]. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2000, 36 (05) : 1318 - 1329
  • [4] BELLINI A, 2005, IEEE IEMDC05
  • [5] BELLINI A, 2001, EPE 0U
  • [6] BELLINI A, 2006, IECONS 06
  • [7] BELLINI A, 2001, IEEE SDEMPED 01, P532
  • [8] Briz F, 2004, IEEE T IND APPL, V40, P1153, DOI [10.1109/TIA.2004.830792, 10.1109/tia.2004.830792]
  • [9] Insulation failure prediction in AC machines using line-neutral voltages
    Cash, MA
    Habetler, TG
    Kliman, GB
    [J]. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1998, 34 (06) : 1234 - 1239
  • [10] CRUZ SMA, 2006, IEEE IAS