Effect of Steel Fiber Volume Fraction and Curing Conditions on the Compressive Behavior of Alkali-Activated Slag Concrete

被引：0
|
作者：
Kang, Dae Hyun [1 ]
Kim, Hye Ran [1 ]
Yun, Hyun Do [1 ]
机构：
[1] Chungnam Natl Univ, Dept Architectural Engn, Taejon 305764, South Korea
来源：
Development of Industrial Manufacturing | 2014年 / 525卷
关键词：
Alkali-Activated Slag (AAS); Steel Fiber; Compressive Strength; Curing method;
D O I：
10.4028/www.scientific.net/AMM.525.491
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
In this paper, an experimental investigation was carried out to examine the influence of hooked end steel fiber volume fraction and curing conditions on the compressive performance of concrete produced by using ordinary portland cement (OPC) and alkali-activated slag (AAS). Three different volume fractions of 0.5%, 1.0% and 1.5% were used in OPC and AAS concrete mixtures. Cylindrical specimens with 100 x 200mm were tested for compressive behavior of both concretes at 3, 7 and 28 days of curing age. Test results showed that curing conditions had a significant effect on compressive properties in the hardened OPC and AAS concretes. The addition of steel fibers generated a decrease in compressive strength of OPC while an increase in the compressive strength of AAS concrete was shown with adding steel fiber.
引用
收藏
页码：491 / 494
页数：4
相关论文
共 50 条
  • [21] Effect of Early Age-Curing Methods on Drying Shrinkage of Alkali-Activated Slag Concrete
    Cai, Yuxin
    Yu, Linwen
    Yang, Yong
    Gao, Yang
    Yang, Changhui
    MATERIALS, 2019, 12 (10)
  • [22] A review on alkali-activated slag concrete
    Amer, Ismail
    Kohail, Mohamed
    El-Feky, M. S.
    Rashad, Ahmed
    Khalaf, Mohamed A.
    AIN SHAMS ENGINEERING JOURNAL, 2021, 12 (02) : 1475 - 1499
  • [23] Influence of activator type and slag volume fraction on properties of alkali-activated slag pastes
    Hajzler, J.
    Bilek, V., Jr.
    Kotrla, J.
    Kucharczykova, B.
    INTERNATIONAL CONFERENCE BUILDING MATERIALS, PRODUCTS AND TECHNOLOGIES, ICBMPT 2022, 2022, 2341
  • [24] Mechanical Properties and Eco-Efficiency of Steel Fiber Reinforced Alkali-Activated Slag Concrete
    Kim, Sun-Woo
    Jang, Seok-Joon
    Kang, Dae-Hyun
    Ahn, Kyung-Lim
    Yun, Hyun-Do
    MATERIALS, 2015, 8 (11): : 7309 - 7321
  • [25] Influence of Different Curing Regimes on the Performance and Microstructure of Alkali-Activated Slag Concrete
    El-Hassan, Hilal
    Shehab, Ehab
    Al-Sallamin, Abdelrahman
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2018, 30 (09)
  • [26] Alkali-Activated Phosphorous Slag Performance under Different Curing Conditions: Compressive Strength, Hydration Products, and Microstructure
    Maghsoodloorad, Hojjatollah
    Khalili, Hamidreza
    Allahverdi, Ali
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2018, 30 (01)
  • [27] Optimized Alkali-Activated Slag-Based Concrete Reinforced with Recycled Tire Steel Fiber
    Eskandarinia, Milad
    Esmailzade, Mina
    Hojatkashani, Ata
    Rahmani, Aida
    Jahandari, Soheil
    MATERIALS, 2022, 15 (19)
  • [28] Influence of fiber on the shrinkage performance of alkali-activated slag recycled concrete
    Li, Yunhe
    Chen, Pang
    Chen, Zaixian
    Liu, Xinghao
    Liu, Zhaomeng
    Liu, Yinbo
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2024, 24 (03)
  • [29] Effect of hybrid polypropylene fibers on mechanical and shrinkage behavior of alkali-activated slag concrete
    Hassan, Amr
    Elnemr, Amr
    Goebel, Luise
    Koenke, Carsten
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 411
  • [30] Size effect in the mechanical characteristics of steel fiber reinforced alkali-activated slag/fly ash-based concrete
    Wu, Feng
    Li, Biao
    Yu, Jiali
    Li, Yang
    Wang, Shunan
    Jiang, Guolong
    Wang, Songbo
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 443
12345