Welding of advanced high strength aluminium-lithium alloys

被引：0

作者：

Nair, CGK ^{[1
]}

Krishnadev, MR ^{[1
]}

机构：

[1] Hindustan Aeronaut Ltd, Bangalore 560001, Karnataka, India

来源：

METAL WELDING AND APPLICATIONS: THERMOMECHANICAL PROCESSING OF ALLOYS | 1999年

关键词：

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Weldability problems like crack sensitivity, porosity and degradation of heat affected zone are highlighted from the literature. Welding parameters of 2 mm thick Al-1.2Li-1.8Cu-1.0Mg-0.15Zr alloy sheets were optimised using tungsten inert gas, electron beam and resistance welding processes. Low weld efficiency of about 50% in the as welded condition of electron beam welding as compared to that of 70% in tungsten inert gas welding is attributed to loss of lithium during the former process and post weld beat treatment restored the same to 80% and 90% respectively. Resistance welding has given shear strength values well above the requirements.

引用

页码：315 / 330

页数：16

共 50 条

[41] RECENT R&D OF ALUMINIUM ALLOYS FOR AIRCRAFT APPLICATIONS: PART 1. ALUMINIUM-LITHIUM ALLOYS.
Uno, Teruo
Hirano, Seiichi
Sumitomo Keikinzoku Giho/Sumitomo Light Metal Technical Reports, 1988, 29 (01): : 47 - 57
[42] On the α(Al)/δ′(Al3Li) metastable solvus in aluminium-lithium alloys
Noble, B
Bray, SE
ACTA MATERIALIA, 1998, 46 (17) : 6163 - 6171
[43] The status and development of aluminium-lithium alloy
Zheng, ZQ
Huang, LP
Chen, ZG
Jiang, N
RARE METAL MATERIALS AND ENGINEERING, 2001, 30 : 125 - 130
[44] Dry sliding wear behaviour of aluminium-lithium alloys reinforced with SiC particles
Rodriguez, J.
Poza, P.
Garrido, M. A.
Rico, A.
WEAR, 2007, 262 (3-4) : 292 - 300
[45] Photoemissive properties of binary magnesium-barium and aluminium-lithium metallic alloys
Tkachenko, VG
Maksimchuk, IN
Shklover, VV
Katrich, GA
Klimov, VV
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 1996, 62 (03): : 285 - 287
[46] Joint formation by twin-spot laser welding of 1420 aluminium-lithium alloy
Yang, Jing
Li, Xiaoyan
Gong, Shuili
Chen, Li
Li, Qiaoyan
Hanjie Xuebao/Transactions of the China Welding Institution, 2010, 31 (12): : 29 - 32
[47] Relationship between fracture resistance and structural transformations in welding 1412 aluminium-lithium alloy
Labour, T.M.
Ishchenko, A. Ya
Taranova, T.G.
Grigorenko, G.M.
Kostin, V.A.
Chaika, A.A.
Welding International, 2014, 28 (05) : 397 - 402
[48] Fracture toughness and stress corrosion cracking of aluminium-lithium alloys 2090 and 2091
Ohsaki, S
Kobayashi, K
IIno, M
Sakamoto, T
CORROSION SCIENCE, 1996, 38 (05) : 793 - 802
[49] Semi-solid processing of tailored aluminium-lithium alloys for automotive applications
Sauermann, Roger
Friedrich, Bernd
Buenck, Matthias
Buehrig-Polaczek, Andreas
Uggowitzer, Peter J.
ADVANCED ENGINEERING MATERIALS, 2007, 9 (04) : 253 - 258
[50] Investigation of Fatigue Strength and Norms of Emission of Harmful Substances in the Air during MIG and TIG Welding of 1460 Aluminium-Lithium Alloy
Lukianenko, Anna
Labur, Tetiana M.
Pokliatskyi, Anatolii G.
Motrunich, Sviatoslav
Bajic, Darko
FME TRANSACTIONS, 2019, 47 (03): : 608 - 612

← 1 2 3 4 5 →