Welding of advanced high strength aluminium-lithium alloys

被引：0

作者：

Nair, CGK ^{[1
]}

Krishnadev, MR ^{[1
]}

机构：

[1] Hindustan Aeronaut Ltd, Bangalore 560001, Karnataka, India

来源：

METAL WELDING AND APPLICATIONS: THERMOMECHANICAL PROCESSING OF ALLOYS | 1999年

关键词：

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Weldability problems like crack sensitivity, porosity and degradation of heat affected zone are highlighted from the literature. Welding parameters of 2 mm thick Al-1.2Li-1.8Cu-1.0Mg-0.15Zr alloy sheets were optimised using tungsten inert gas, electron beam and resistance welding processes. Low weld efficiency of about 50% in the as welded condition of electron beam welding as compared to that of 70% in tungsten inert gas welding is attributed to loss of lithium during the former process and post weld beat treatment restored the same to 80% and 90% respectively. Resistance welding has given shear strength values well above the requirements.

引用

页码：315 / 330

页数：16

共 50 条

[31] Characteristics of 5A90 Aluminium-lithium Alloy for YAG Laser Welding
Xu Fei
Gong Shuili
Chen Li
Yang Jing
DISCOVERY, INNOVATION AND COMMUNICATION - 5TH CSAA SCIENCE AND TECHNIQUE YOUTH FORUM, 2012, : 412 - 415
[32] BEHAVIOR OF HELIUM BUBBLES IN COLD-WORKED ALUMINIUM-LITHIUM ALLOYS
TANI, S
ISHINO, S
MISHIMA, Y
JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 1976, 13 (12) : 722 - 730
[33] Effects of Cerium on Texture and Mechanical Property of 2090 Aluminium-Lithium Alloys
张敏刚
金志浩
严隽民
耿东生
张宝昌
Journal of Rare Earths, 2000, (01) : 69 - 72
[34] On the bilinearity in fatigue power-law relationships in aluminium-lithium alloys
Prasad, NE
Malakondaiah, G
Kutumbarao, VV
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1996, 49 (04) : 465 - 469
[35] Characteristics of Joint Welded by Laser Welding of Aluminium-Lithium Alloy with Filler Wire
Yang JLi X YGong S LChen LXu F School of Material Science and EngineeringBeijing University of TechnologyBeijing China Science and Technology on Power Beam Processes LaboratoryBeijing Aeronautical Manufacturing Technology Research InstituteBeijing China
稀有金属材料与工程, 2011, 40(S4) (S4) : 138 - 141
[36] Characteristics of Joint Welded by Laser Welding of Aluminium-Lithium Alloy with Filler Wire
Yang, J.
Li, X. Y.
Gong, S. L.
Chen, L.
Xu, F.
RARE METAL MATERIALS AND ENGINEERING, 2011, 40 : 138 - 141
[37] Effect of welding techniques on microstructure and mechanical properties of aluminium-lithium alloy welds
Reddy, GM
Gokhale, AA
Saxena, VK
Rao, KP
ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 2000, 331-3 : 1751 - 1756
[38] Friction stir welding of V-1461 and V-1469 high strength aluminium–lithium alloys
Lukin V.I.
Ioda E.N.
Skupov A.A.
Ovchinnikov V.V.
Welding International, 2016, 30 (07) : 552 - 556
[39] Quantification of precipitation kinetics and age hardening in aluminium-lithium and aluminium-copper-magnesium alloys
Sha, W
PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, : 2559 - 2562
[40] The main directions of aluminium-lithium alloys quality increasing for welded aviation structures
Fridlander, I.N.
Bratukhin, A.G.
Davydov, V.G.
Fizika i Khimiya Obrabotki Materialov, 1993, (03): : 117 - 122

← 1 2 3 4 5 →