Welding of advanced high strength aluminium-lithium alloys

被引：0

作者：

Nair, CGK ^{[1
]}

Krishnadev, MR ^{[1
]}

机构：

[1] Hindustan Aeronaut Ltd, Bangalore 560001, Karnataka, India

来源：

METAL WELDING AND APPLICATIONS: THERMOMECHANICAL PROCESSING OF ALLOYS | 1999年

关键词：

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Weldability problems like crack sensitivity, porosity and degradation of heat affected zone are highlighted from the literature. Welding parameters of 2 mm thick Al-1.2Li-1.8Cu-1.0Mg-0.15Zr alloy sheets were optimised using tungsten inert gas, electron beam and resistance welding processes. Low weld efficiency of about 50% in the as welded condition of electron beam welding as compared to that of 70% in tungsten inert gas welding is attributed to loss of lithium during the former process and post weld beat treatment restored the same to 80% and 90% respectively. Resistance welding has given shear strength values well above the requirements.

引用

页码：315 / 330

页数：16

共 50 条

[21] Damage tolerance behaviour of aluminium-lithium sheet alloys
Wanhill, R.J.H.
Nationaal Lucht-en Ruimtevaartlaboratorium, Verslagen en Verhandelingen, 1991, (TP 91244):
[22] Typical Joint Defects in Laser Welding of Aluminium-Lithium Alloy
Yang, J.
Gang, S.
Li, X.
Chen, Li
Xu, F.
PROCEEDINGS OF THE 36TH INTERNATIONAL MATADOR CONFERENCE, 2010, : 595 - 598
[23] Characterization and depth profile of lithium depletion in aluminium-lithium alloys by ultrasound
Lindgren, EA
Martin, LP
Rosen, M
REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 17A AND 17B, 1998, : 1435 - 1442
[24] Aluminium-lithium research
不详
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 1998, 70 (04): : 317 - 317
[25] Microstructural analysis of intermetallic phases in aluminium-lithium alloys.
Vine, WJ
Imeson, D
ELECTRON MICROSCOPY AND ANALYSIS 1995, 1995, 147 : 523 - 526
[26] Long term exposure of aluminium-lithium alloys at low temperatures
Noble, B
Harris, SJ
Dinsdale, K
ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3, 2002, 396-4 : 1389 - 1394
[27] Anisotropy of elastic properties in various aluminium-lithium sheet alloys
Zeng, XH
Ericsson, T
ACTA MATERIALIA, 1996, 44 (05) : 1801 - 1812
[28] The importance of thermal management in the welding of high strength aluminium alloys
Bassett, JC
COMPASS 1999 : COMPONENT OPTIMISATION FROM MATERIALS PROPERTIES AND SIMULATION SOFTWARE, 1999, : 55 - 62
[29] Effects of cerium on texture and mechanical property of 2090 aluminium-lithium alloys
Zhang, MG
Jin, ZH
Yan, JM
Geng, DS
Zhang, BC
JOURNAL OF RARE EARTHS, 2000, 18 (01) : 69 - 72
[30] BEHAVIOUR OF RADIATION-INDUCED GAS IN IRRADIATED ALUMINIUM-LITHIUM ALLOYS
SMITH, IO
RUSSELL, B
JOURNAL OF NUCLEAR MATERIALS, 1970, 35 (02) : 137 - &

← 1 2 3 4 5 →