A generalized mixed isotropic-kinematic hardening plastic model coupled with anisotropic damage for sheet metal forming

被引：15
作者：
Chow, CL [1 ]
Yang, XJ [1 ]
机构：
[1] Univ Michigan, Dept Mech Engn, Dearborn, MI 48128 USA
来源：
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS | 2004年 / 13卷 / 01期
关键词：
damage; isotropic hardening; anisotropic kinematic hardening; anisotropic plasticity; LS-DYNA3D; sheet metal forming;
D O I：
10.1177/1056789504039258
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper presents a generalized mixed isotropic-kinematic hardening plastic model coupled with anisotropic damage for sheet metal forming. A nonlinear anisotropic kinematic hardening is developed. For the predication of limit strains at localized necking in stamping under complex strain history, the model and its associated damage criterion for localized necking are established and implemented into LS-DYNA3D by compiling it as a user subroutine. The finite element simulation of LS-DYNA3D based on the present model is carried out. The location of localized necking for sheet metal forming has been successfully identified.
引用
收藏
页码：81 / 101
页数：21
相关论文
共 42 条
  • [31] Failure modelling in metal forming by means of an anisotropic hyperelastic-plasticity model with damage
    Vladimirov, Ivaylo N.
    Pietryga, Michael P.
    Kiliclar, Yalin
    Tini, Vivian
    Reese, Stefanie
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2014, 23 (08) : 1096 - 1132
  • [32] A simple isotropic-distortional hardening model and its application in elastic-plastic analysis of localized necking in orthotropic sheet metals
    Aretz, Holger
    INTERNATIONAL JOURNAL OF PLASTICITY, 2008, 24 (09) : 1457 - 1480
  • [33] Fatigue crack growth determination based on cyclic plastic zone and cyclic J-integral in kinematic-isotropic hardening materials with considering Chaboche model
    Hosseini, Reza
    Seifi, Rahman
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2020, 43 (11) : 2668 - 2682
  • [34] Residual stresses in 3D sheet metal guillotining using a coupled finite elastoplastic damage model
    Cherouat, A.
    Belamri, N.
    Saanouni, K.
    Autesserre, P.
    RESIDUAL STRESSES VII, 2006, 524-525 : 89 - 94
  • [35] Failure assessment in sheet metal forming using a phenomenological damage model and fracture criterion: experiments, parameter identification and validation
    Heibel, Sebastian
    Nester, Winfried
    Clausmeyer, Till
    Tekkaya, A. Erman
    INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017, 2017, 207 : 2066 - 2071
  • [36] The whole-life ratcheting behavior of internal pressurized elbow subjected to force and displacement cycling with a damage-coupled kinematic hardening model
    Liu, Caiming
    Chen, Xu
    Chen, Weiqiu
    Shan, Liyuan
    Su, Xuming
    Zhu, Xinyue
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2024, 209
  • [37] 3D numerical simulation of anisotropic thin sheet metal slitting process using fully coupled constitutive equations including ductile damage
    K. Saanouni
    N. Belamri
    P. Autesserre
    International Journal of Material Forming, 2009, 2
  • [38] 3D NUMERICAL SIMULATION OF ANISOTROPIC THIN SHEET METAL SLITTING PROCESS USING FULLY COUPLED CONSTITUTIVE EQUATIONS INCLUDING DUCTILE DAMAGE
    Saanouni, K.
    Belamri, N.
    Autesserre, P.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2009, 2 : 535 - 538
  • [39] The simulation of robot based incremental sheet metal forming by means of a new solid-shell finite element technology and a finite elastoplastic model with combined hardening
    Kiliclar, Yalin
    Laurischkat, Roman
    Reese, Stefanie
    Meier, Horst
    SHEET METAL 2011, 2011, 473 : 875 - +
  • [40] Blank Optimization in Elliptical-Shape Sheet Metal Forming Using Response Surface Model Coupled with Reduced Basis Technique and Finite Element Analysis
    Khalilli, Khalil
    Kahhal, Parviz
    Shahri, Ehsan Eftekhari
    Khalili, M. Soheil
    SHEET METAL 2011, 2011, 473 : 683 - +
12345