Preparation and characterization of open-cell epoxy foams modified with carbon fibers and aluminum powder

被引：20

作者：

Smorygo, Oleg ^{[1
]}

Mikutski, Vitali ^{[1
]}

Marukovich, Alexander ^{[1
]}

Sadykov, Vladislav ^{[2
,3
]}

Bespalko, Yulia ^{[2
]}

Stefan, Adriana ^{[4
]}

Pelin, Cristina-Elisabeta ^{[4
]}

机构：

[1] Powder Met Inst, 41 Platonov Str, Minsk 220005, BELARUS

[2] Boreskov Inst Catalysis, 5 Lavrentiev Ave, Novosibirsk 630090, Russia

[3] Novosibirsk State Univ, 2 Pirogov Str, Novosibirsk 630009, Russia

[4] Natl Inst Aerosp Res & Dev Elie Carafoli, 220 Iuliu Maniu,Dist 6, Bucharest 061126, Romania

来源：

COMPOSITE STRUCTURES | 2018年 / 202卷

关键词：

Foam; Epoxy matrix; Compressive strength; Sandwich core; MECHANICAL-PROPERTIES; COMPOSITES; BEHAVIOR;

D O I：

10.1016/j.compstruct.2018.04.063

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Epoxy foams were prepared by the sacrificial template method. The porous template was prepared from carbamide granules and then impregnated with epoxy resin. The method ensured foams with low relative density of 0.334-0.358 and an open-cell structure consisting of regular spherical cells and round interconnecting windows. Epoxy resin was modified with short carbon fibers and aluminum powder. Both fillers ensured the increase in compressive strength by 12-15% as compared to the neat epoxy foam. The carbon fiber filler ensured much higher specific strength ( up to 18.5-18.6 MPa.cm(3).g(-1)) due to little effect on the foam density. Sandwich composite samples were prepared using CPRF facing and the epoxy foam core, and promising mechanical properties of the sandwiches were stated by the 3-point midspan flexure test.

引用

页码：917 / 923

页数：7

共 50 条

[21] Mechanical and sound absorption properties of open-cell polyurethane foams modified with rock wool fiber [J].

Mohammadi, Behzad ;

Ershad-Langroudi, Amir ;

Moradi, Gholamreza ;

Safaiyan, Abdolrasoul ;

Habibi, Peymaneh .

JOURNAL OF BUILDING ENGINEERING, 2022, 48

[22] Preparation and characterization of epoxy/γ-aluminum oxide nanocomposites [J].

Chen, Cheng-Ho ;

Jian, Jian-Yuan ;

Yen, Fu-Su .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2009, 40 (04) :463-468

[23] Effect of dual-size cell mix on the stiffness and strength of open-cell aluminum foams [J].

Li, JR ;

Cheng, HF ;

Yu, JL ;

Han, FS .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 362 (1-2) :240-248

[24] Hybrid Structures Made of Polyurethane/Graphene Nanocomposite Foams Embedded within Aluminum Open-Cell Foam [J].

Pinto, Susana C. ;

Marques, Paula A. A. P. ;

Vicente, Romeu ;

Godinho, Luis ;

Duarte, Isabel .

METALS, 2020, 10 (06) :1-15

[25] The antimicrobial effect of open-cell silver foams [J].

S. Asavavisithchai ;

A. Oonpraderm ;

U. Rungsardthong Ruktanonchai .

Journal of Materials Science: Materials in Medicine, 2010, 21 :1329-1334

[26] A simple preparation method and characterization of epoxy reinforced microporous phenolic open-cell sound absorbent foam [J].

Gong, Rui ;

Xu, Qian ;

Chu, Yineng ;

Gu, Xingyue ;

Ma, Jie ;

Li, Ruihai .

RSC ADVANCES, 2015, 5 (83) :68003-68013

[27] Laser forming of open-cell aluminium foams [J].

Quadrini, F. ;

Guglielmotti, A. ;

Squeo, E. A. ;

Tagliaferri, V. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (11) :1517-1522

[28] Producing replicated open-cell aluminum foams by a novel method of melt squeezing procedure [J].

Jamshidi-Alashti, Ramin ;

Roudini, Ghodratollah .

MATERIALS LETTERS, 2012, 76 :233-236

[29] Compressive behavior and energy absorption capacity of unconstrained and constrained open-cell aluminum foams [J].

Li, Chengbing ;

Li, Chunxing ;

Wang, Yazhou .

ADVANCED COMPOSITES LETTERS, 2020, 29

[30] On the crushing response of random open-cell foams [J].

Gaitanaros, Stavros ;

Kyriakides, Stelios ;

Kraynik, Andrew M. .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2012, 49 (19-20) :2733-2743

← 1 2 3 4 5 →