Experimental investigation of mode-I fracture toughness of real-cracked concrete repaired by epoxy

被引:13
作者
Kan, Yu-Cheng [1 ]
Lee, Ming-Gin [1 ]
Lee, Hung-Wei [1 ]
机构
[1] Chaoyang Univ Technol, Taichung, Taiwan
关键词
Fracture; Toughness; Concrete; Crack; Epoxy; Repair;
D O I
10.1016/j.conbuildmat.2021.123490
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper presents the behavior of fracture mechanics and fracture properties of epoxy-repaired con-crete in Mode I fracture. A single-edged notch (SEN) beam in a three-point bending test was conducted to evaluate the fracture properties of plain concrete and the repaired of itself. The testing methods rec-ommended by RILEM: (a) two-parameter model by Jenq and Shah and (b) fictitious model by Hillerborg were used to determine the fracture toughness and fracture energy, respectively. Epoxy mortars with four fine sand contents were used to repair concrete crack with various widths. The test results revealed that epoxy resin and mortar improve the fracture toughness and fracture energy of the repaired concrete. And, the both are increasing with the increase of the fine sand content in epoxy mortar up to the amount that the workability being allowed. The Mode I fracture behavior of the repaired concrete performs higher fracture resistance and more ductile than plain concrete. (c) 2021 Elsevier Ltd. All rights reserved.
引用
收藏
页数:10
相关论文
共 22 条
[1]  
AbuTair AI, 1996, ACI MATER J, V93, P553
[2]  
ACI (American Concrete Institute), 2008, 503R93 ACI
[3]  
Alexander MG., 2008, CONCRETE REPAIR REHA
[4]  
[Anonymous], 1991, Mater Struct, V23, P457
[5]   Experimental characterization of concrete-epoxy interfaces [J].
Coronado, Carlos A. ;
Lopez, Maria M. .
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2008, 20 (04) :303-312
[6]  
EN. (European Standards), 2004, EN15044
[7]  
FRENCH CW, 1990, ACI STRUCT J, V87, P416
[8]  
Hillerborg A., 1985, MATER STRUCT, V18, P291, DOI DOI 10.1007/BF02472919
[9]  
Hindo K.R., 1990, Concrete International, V12, P46
[10]   2 PARAMETER FRACTURE MODEL FOR CONCRETE [J].
JENQ, YH ;
SHAH, SP .
JOURNAL OF ENGINEERING MECHANICS-ASCE, 1985, 111 (10) :1227-1241