Understanding formability of extra-deep drawing steel at elevated temperature using finite element simulation

被引：60

作者：

Singh, Swadesh Kumar ^{[1
]}

Mahesh, K. ^{[2
]}

Kumar, Apurv ^{[3
]}

Swathi, M. ^{[4
]}

机构：

[1] GRIET, Dept Mech Engn, Hyderabad 500072, Andhra Pradesh, India

[2] Indian Inst Technol, Dept Met & Mat Engn, Madras 600036, Tamil Nadu, India

[3] Indian Inst Technol, Dept Mech Engn, Madras 600036, Tamil Nadu, India

[4] JNTUH, Dept Mech Engn, Hyderabad 500072, Andhra Pradesh, India

来源：

MATERIALS & DESIGN | 2010年 / 31卷 / 09期

关键词：

FORMING BEHAVIOR; ALUMINUM; MAGNESIUM; ALLOY;

D O I：

10.1016/j.matdes.2010.04.049

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Deep drawing involves conversion of flat thin sheet metal blanks into parts of desired shape. Although applications of deep drawing processes at elevated temperatures (warm forming) have not yet been used effectively nowadays, it is clear that it is going to be a very important manufacturing application in the future. Warm deep drawing process of circular blanks is investigated using a 20 T hydraulic press and a finite element model coupled with thermal analysis. The present work is aimed to investigate the limiting draw ratio (LDR) and the coefficient of friction of extra-deep drawing (EDD) steels at room temperature and at 200 degrees C. Simulation and experimental results showed an increase in the LDR as the temperature increases and the coefficient of friction was estimated by comparing the simulation and experimental load-displacement curve. Finite element simulation results were in good agreement with the experimental results. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：4478 / 4484

页数：7

共 19 条

[1] Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B [J].

Agnew, SR ;

Duygulu, Ö .

INTERNATIONAL JOURNAL OF PLASTICITY, 2005, 21 (06) :1161-1193

[2] ALLOYING ALUMINUM WITH MAGNESIUM FOR DUCTILITY AT WARM TEMPERATURES (25 TO 250-DEGREES-C) [J].

AYRES, RA .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1979, 10 (07) :849-854

[3] Feasibility of warm drawing of aluminium products [J].

Bolt, PJ ;

Lamboo, NAPM ;

Rozier, PJCM .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 115 (01) :118-121

[4] On the dynamic effects of explicit FEM in sheet metal forming analysis [J].

Chung, WJ ;

Cho, JW ;

Belytschko, T .

ENGINEERING COMPUTATIONS, 1998, 15 (6-7) :750-+

[5]

Fekete J. R., 1997, SOC AUTOMOTIVE ENG, V106, P699

[6]

Hallquist JO, 1998, DYNAFORM MANUAL V1 0

[7] ROOM-TEMPERATURE FORMABILITY OF PARTICLE-REINFORCED METAL-MATRIX COMPOSITES - FORGING, EXTRUSION AND DEEP-DRAWING [J].

JIANG, J ;

COLLADO, C ;

KEELEY, D ;

DODD, B .

COMPOSITES, 1995, 26 (11) :785-789

[8] Comparison stamping and hydro-mechanical forming process for an automobile fuel tank using finite element method [J].

Kim, J ;

Son, BM ;

Kang, BS ;

Hwang, SM ;

Park, HJ .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 153 :550-557

[9] Comparison of implicit and explicit finite-element methods for the hydroforming process of an automobile lower arm [J].

Choi H.-H. ;

Hwang S.-M. ;

Kang Y.H. ;

Kim J. ;

Kang B.S. .

International Journal of Advanced Manufacturing Technology, 2002, 20 (06) :407-413

[10]

Kumar DR, 2002, J MATER PROCESS TECH, V130, P31

← 1 2 →