Ultrahigh-temperature tensile creep of TiC-reinforced Mo-Si-B-based alloy

In this study, the ultrahigh-temperature tensile creep behaviour of a TiC-reinforced Mo-Si-B-based alloy was investigated in the temperature range of 1400-1600 degrees C at constant true stress. The tests were performed in a stress range of 100-300 MPa for 400 h under vacuum, and creep rupture data were rationalized with Larson-Miller and Monkman-Grant plots. Interestingly, the MoSiBTiC alloy displayed excellent creep strength with relatively reasonable creep parameters in the ultrahigh-temperature range: a rupture time of similar to 400 h at 1400 degrees C under 137 MPa with a stress exponent (n) of 3 and an apparent activation energy of creep (Q(app)) of 550 kJ/mol. The increasing rupture strains with decreasing stresses (up to 70%) and moderate strain-rate oscillations in the creep curves suggest that two mechanisms contribute to the creep: phase boundary sliding between the hard T-2 and (Ti, Mo)C phases and the Moss phase, and dynamic recovery and recrystallization in Mo-ss, observed with orientation imaging scanning electron microscopy. The results presented here represent the first full analysis of creep for the MoSiBTiC alloy in an ultrahigh-temperature range. They indicate that the high-temperature mechanical properties of this material under vacuum are promising.