Solidification process and mechanical behavior of the Nb/Nb5Si3 two phase alloys in the Nb-Ti-Si system

被引：32
|
作者：
Sekido, N
Kimura, Y
Miura, S
Mishima, Y
机构：
[1] Tokyo Inst Technol, Dept Mat Sci & Engn, Yokohama, Kanagawa 2268502, Japan
[2] Hokkaido Univ, Div Mat Sci & Engn, Sapporo, Hokkaido 0600813, Japan
来源：
MATERIALS TRANSACTIONS | 2004年 / 45卷 / 12期
关键词：
phase equilibria; solidification; eutectoid reaction; fracture toughness;
D O I：
10.2320/matertrans.45.3264
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Design of two-phase alloys consisting of niobium solid solution (A2) and alpha-Nb5Si3 (D8(1)) phases in the Nb-Ti-Si tertiary system is pursued for ultra-high temperature structural applications. Compositional and annealing conditions are determined for the formation of A2/D8(1) lamellar microstructure via cutectoid decomposition of Nb3Si (tP32) phase in the Nb-Si binary and Nb-Ti-Si tertiary system. Addition of titanium is found to result in increased room temperature toughness, but decreased high temperature strength. Enhancement of mechanical properties is achieved by applying the directional solidification technique. Mechanical properties of the alloys are discussed from microstructural point of view.
引用
收藏
页码：3264 / 3271
页数：8
相关论文
共 50 条
  • [1] Toughening of α-Nb5Si3 by Ti
    Shi, Songxin
    Zhu, Linggang
    Zhang, Hu
    Sun, Zhimei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 689 : 296 - 301
  • [2] Microstructure and mechanical properties of Nb/Nb5Si3 in situ composites in Nb-Mo-Si and Nb-W-Si systems
    Ma, CL
    Li, JG
    Tan, Y
    Tanaka, R
    Hanada, S
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 386 (1-2): : 375 - 383
  • [3] On the Alloying and Properties of Tetragonal Nb5Si3 in Nb-Silicide Based Alloys
    Tsakiropoulos, Panos
    MATERIALS, 2018, 11 (01):
  • [4] Type of Primary Nb5Si3 and Precipitation of Nbss in Nb5Si3 in a Nb-8.3Ti-21.1Si-5.4Mo-4W-0.7Hf (at.%) Near Eutectic Nb-Silicide-Based Alloy
    McCaughey, Conor
    Tsakiropoulos, Panos
    MATERIALS, 2018, 11 (06):
  • [5] Morphological Heredity of Intermetallic Nb5Si3 Dendrites in Hypereutectic Nb-Si Based Alloys via Non-Equilibrium Solidification
    Guo, Yueling
    Jia, Lina
    Lu, Wenjun
    Zhang, Hu
    CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2022, 35 (01)
  • [6] Microstructure and mechanical properties of in-situ laminated Nb/Nb5Si3 composites
    Yu, C. X.
    Zhao, X. J.
    Xiao, L. R.
    Cai, Z. Y.
    Zhang, B.
    Guo, L.
    MATERIALS LETTERS, 2017, 209 : 606 - 608
  • [7] Microstructural evolution and mechanical properties of Nb-Si-Cr ternary alloys with a tri-phase Nb/Nb5Si3/Cr2Nb microstructure fabricated by spark plasma sintering
    Zhang, Shasha
    Liu, Wei
    Sha, Jiangbo
    PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2018, 28 (05) : 626 - 634
  • [8] Microstructural evolution and mechanical properties of Nb-Si-Cr ternary alloys with a tri-phase Nb/Nb5Si3/Cr2Nb microstructure fabricated by spark plasma sintering
    Shasha Zhang
    Wei Liu
    Jiangbo Sha
    ProgressinNaturalScience:MaterialsInternational, 2018, 28 (05) : 626 - 634
  • [9] Alloying and Hardness of Eutectics with Nbss and Nb5Si3 in Nb-silicide Based Alloys
    Tsakiropoulos, Panos
    MATERIALS, 2018, 11 (04):
  • [10] Effect of Nb and Nb5Si3 Powder Size on Microstructure and Fracture Behavior of an Nb-16Si Alloy Fabricated by Spark Plasma Sintering
    Wei Liu
    Jiangbo Sha
    Metallurgical and Materials Transactions A, 2014, 45 : 4316 - 4323
12345