Study on abnormal hot corrosion behavior of nickel-based single-crystal superalloy at 900 °C after drilling

被引:10
作者
Chen, Zehao [1 ]
Wu, Mengmeng [1 ]
Pei, Yanling [1 ]
Li, Shusuo [1 ]
Gong, Shengkai [1 ]
机构
[1] Beihang Univ, Sch Mat Sci & Engn, Beijing, Peoples R China
基金
中国国家自然科学基金;
关键词
ELECTRICAL-DISCHARGE; CRACK-GROWTH; LASER; OXIDATION; OPTIMIZATION; FATIGUE; HOLES; PERFORMANCE; PARAMETERS; SPALLATION;
D O I
10.1038/s41529-021-00167-4
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The hot corrosion behavior of nickel-based single-crystal superalloy after drilling is investigated at 900 degrees C. The characteristics of hot corrosion after drilling which are different from normal hot corrosion are reflected in the formation of a more stable oxide layer and less severe spallation. The change of microstructure around the hole is the main reason for the formation of a stable oxide layer during hot corrosion by changing the diffusion process of alloying elements. Subsequently, the formation of a stable oxide layer can reduce the effect of spalling by optimizing surface stress.
引用
收藏
页数:10
相关论文
共 50 条
[1]  
Aminov R. Z., 2018, Journal of Physics: Conference Series, V1111, DOI 10.1088/1742-6596/1111/1/012046
[2]   Optimization of micro-EDM drilling of inconel 718 superalloy [J].
Ay, Mustafa ;
Caydas, Ulas ;
Hascalik, Ahmet .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 66 (5-8) :1015-1023
[3]  
BETTERIDGE W, 1987, MATER SCI TECH SER, V3, P682, DOI 10.1179/026708387790329847
[4]  
Birks N, 2006, INTRODUCTION TO THE HIGH-TEMPERATURE OXIDATION OF METALS, 2ND EDITION, P1, DOI 10.1017/CBO9781139163903
[5]   Effect of high-gradient directed crystallization on the structure and phase composition of a high-temperature alloy of the type RENE-N5 [J].
Bondarenko, YA ;
Kablov, EN ;
Morozova, GI .
METAL SCIENCE AND HEAT TREATMENT, 1999, 41 (1-2) :61-64
[6]  
[柴怡君 Chai Yijun], 2015, [应用数学和力学, Applied Mathematics and Mechanics], V36, P404
[7]   Interaction of Ta and Cr on Type-I hot corrosion resistance of single crystal Ni-base superalloys [J].
Chang, J. X. ;
Wang, D. ;
Zhang, G. ;
Lou, L. H. ;
Zhang, J. .
CORROSION SCIENCE, 2017, 117 :35-42
[8]  
Chunyan Hu, 2019, Materials Science Forum, V944, P421, DOI 10.4028/www.scientific.net/MSF.944.421
[9]   Characterization and Parametric Optimization of Micro-hole Surfaces in Micro-EDM Drilling on Inconel 718 Superalloy Using Genetic Algorithm [J].
Dilip, Deepak G. ;
Panda, Satyananda ;
Mathew, Jose .
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2020, 45 (07) :5057-5074
[10]   Effect of substrate orientations on microstructure evolution and stability for single crystal superalloys in rapid solidification process [J].
Dong, Tao ;
Gao, Chentong ;
Li, Ling ;
Pei, Yanling ;
Li, Shusuo ;
Gong, Shengkai .
MATERIALS & DESIGN, 2017, 128 :218-230