Technology for very dense hybrid detector arrays using electroplated indium solderbumps

This paper presents a detailed overview of the process steps involved in the hybrid integration process of III-V infrared detector arrays and silicon readout electronics. This process is divided in distinct parts: the postprocessing of the Silicon readout circuit, the Indium solderbump formation by electroplating and the flip-chip process. In contrast to commercially available hybrid arrays, the indium solderbump technology is applied to the III-V array only and not to the silicon readout. This causes specific requirements to the III-V metallization sequence prior to electroplating in order to obtain proper reflow. Two different silicon postprocessing schemes are described. Arrays of 128 x 128, 256 x 256 and 326 x 256 In(Ga)As and InAsSb photovoltaic infrared detectors have been integrated with dedicated. in-house and commercial readout using this process. The feasibility of achieving 10 mum hybrid integration pitch is also shown.