Effect of scanning strategy on the microstructure, texture, and mechanical properties of 15-5PH stainless steel processed by selective laser melting

被引：72

作者：

Nong, X. D. ^{[1
]}

Zhou, X. L. ^{[1
]}

机构：

[1] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China

来源：

MATERIALS CHARACTERIZATION | 2021年 / 174卷

基金：

中国国家自然科学基金;

关键词：

Selective laser melting; Scanning strategy; Crystal texture; 15-5PH; Mechanical properties;

D O I：

10.1016/j.matchar.2021.111012

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Selective laser melting (SLM) was employed to produce 15-5 precipitation hardening (PH) martensite stainless steel. The effects of the scanning strategy on the microstructure, texture, and flowing mechanical behavior of the material were evaluated. Owing to their thermal history, samples processed by SLM with different scanning strategies reveal different austenite/martensite proportions. A weak fiber crystal texture along the build direction is observed, and the texture level is closely related to the scanning strategies. By using the island scanning strategy, high-densification samples with a fine grain structure can be obtained, improving strength and elongation. High-performance 15-5 PH can be achieved even without the application of a precipitation hardening treatment. The results contribute to the tailoring of the densification, microstructure, texture, and mechanical properties of 15-5PH steel produced by additive manufacturing.

引用

页数：14

共 49 条

[1] Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V [J].

Ali, Haider ;

Ghadbeigi, Hassan ;

Mumtaz, Kamran .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 712 :175-187

[2] Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites [J].

AlMangour, Bandar ;

Grzesiak, Dariusz ;

Yang, Jenn-Ming .

JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 728 :424-435

[3] Effect of laser scanning strategies on texture, physical and mechanical properties of laser sintered maraging steel [J].

Bhardwaj, Tarun ;

Shukla, Mukul .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 734 :102-109

[4] Plastic anisotropy and deformation-induced phase transformation of additive manufactured stainless steel [J].

Chae, Hobyung ;

Huang, E-Wen ;

Jain, Jayant ;

Wang, Huamiao ;

Woo, Wanchuck ;

Chen, Shi-Wei ;

Harjo, Stefanus ;

Kawasaki, Takuro ;

Lee, Soo Yeol .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 762

[5] Microstructure, texture and tensile property as a function of scanning speed of Ti-47Al-2Cr-2Nb alloy fabricated by selective electron beam melting [J].

Chen, Yuyong ;

Yue, Hangyu ;

Wang, Xiaopeng .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 713 :195-205

[6] Evolution of the microstructure of a 15-5PH martensitic stainless steel during precipitation hardening heat treatment [J].

Couturier, Laurent ;

De Geuser, Frederic ;

Descoins, Marion ;

Deschamps, Alexis .

MATERIALS & DESIGN, 2016, 107 :416-425

[7] Detecting keyhole pore defects and monitoring process signatures during laser powder bed fusion: A correlation between in situ pyrometry and ex situ X-ray radiography [J].

Forien, Jean-Baptiste ;

Calta, Nicholas P. ;

DePond, Philip J. ;

Guss, Gabe M. ;

Roehling, Tien T. ;

Matthews, Manyalibo J. .

ADDITIVE MANUFACTURING, 2020, 35

[8] Metallurgy of high-silicon steel parts produced using Selective Laser Melting [J].

Garibaldi, Michele ;

Ashcroft, Ian ;

Simonelli, Marco ;

Hague, Richard .

ACTA MATERIALIA, 2016, 110 :207-216

[9] Selective laser melting of pure molybdenum: Evolution of defect and crystallographic texture with process parameters [J].

Higashi, Masaya ;

Ozaki, Tomomichi .

MATERIALS & DESIGN, 2020, 191

[10] Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study [J].

Jung, Hyo Yun ;

Choi, Su Ji ;

Prashanth, Konda G. ;

Stoica, Mihai ;

Scudino, Sergio ;

Yi, Seonghoon ;

Kuehn, Uta ;

Kim, Do Hyang ;

Kim, Ki Buem ;

Eckert, Juergen .

MATERIALS & DESIGN, 2015, 86 :703-708

← 1 2 3 4 5 →