Effect of cooling rate on microstructure and shear strength of pure Sn, Sn-0.7Cu, Sn-3.5Ag, and Sn-37Pb solders

被引：18
作者：
Maveety, JG [1 ]
Liu, P [1 ]
Vijayen, J [1 ]
Hua, F [1 ]
Sanchez, EA [1 ]
机构：
[1] Intel Corp, Santa Clara, CA 95054 USA
来源：
JOURNAL OF ELECTRONIC MATERIALS | 2004年 / 33卷 / 11期
关键词：
eutectic Sn-37Pb; Sn-0.7Cu; Sn-3.5Ag; intermetallic compounds; ultimate shear strength;
D O I：
10.1007/s11664-004-0165-z
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The microstructure and shear strength characteristics of pure Sn and the eutectic compositions of Sn-37Pb, Sn-0.7Cu, and Sn-3.5Ag prepared under identical reflow conditions but subjected to two different cooling conditions were evaluated at room temperature. For the four solders, the ultimate shear strength increased with increasing strain rate from 10(-5) s(-1) to 10(-1) s(-1). Decreasing the cooling rate tended to decrease the ultimate shear strength for both the Sn-0.7Cu and Sn-3.5Ag solders. The effects of work hardening resulting from increased strain rate were more prevalent in quench-cooled (QC) samples.
引用
收藏
页码：1355 / 1362
页数：8
相关论文
共 50 条
  • [1] Effect of cooling rate on microstructure and shear strength of pure Sn, Sn-0.7Cu, Sn-3.5Ag, and Sn-37Pb solders
    J. G. Maveety
    P. Liu
    J. Vijayen
    F. Hua
    E. A. Sanchez
    Journal of Electronic Materials, 2004, 33 : 1355 - 1362
  • [2] Development of solidification microstructure and tensile mechanical properties of Sn-0.7Cu and Sn-0.7Cu-2.0Ag solders
    Spinelli, Jose Eduardo
    Garcia, Amauri
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2014, 25 (01) : 478 - 486
  • [3] Effect of Ag on IMC Growth and Shear Strength of Sn-3.5Ag/Cu microbumps
    Guo, Fayao
    Ling, Huiqin
    Yin, Yihao
    Li, Ming
    Zhang, Wenqi
    Cao, Liqiang
    ICEPT2019: THE 2019 20TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, 2019,
  • [4] Effects of cooling rate and joint size on Sn grain features in Cu/Sn-3.5Ag/Cu solder joints
    Chang, Z. Y.
    Zhao, N.
    Wu, C. M. L.
    MATERIALIA, 2020, 14
  • [5] Development of high strength Sn-0.7Cu solders with the addition of small amount of Ag and In
    El-Daly, A. A.
    Hammad, A. E.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (34) : 8554 - 8560
  • [6] An Investigation of Microstructure and Microhardness of Sn-Cu and Sn-Ag Solders as Functions of Alloy Composition and Cooling Rate
    Seo, Sun-Kyoung
    Kang, Sung K.
    Shih, Da-Yuan
    Lee, Hyuck Mo
    JOURNAL OF ELECTRONIC MATERIALS, 2009, 38 (02) : 257 - 265
  • [7] Using nanoindentation to investigate the temperature cycling of Sn-37Pb solders
    Wen, Hua-Chiang
    Chou, Wu-Ching
    Lin, Po-Chen
    Jeng, Yeau-Ren
    Chen, Chien-Chang
    Chen, Hung-Ming
    Jiang, Don Son
    Cheng, Chun-Hu
    MICROELECTRONICS RELIABILITY, 2017, 78 : 111 - 117
  • [8] Mechanisms for interfacial reactions between liquid Sn-3.5Ag solders and cu substrates
    T. H. Chuang
    H. M. Wu
    M. D. Cheng
    S. Y. Chang
    S. F. Yen
    Journal of Electronic Materials, 2004, 33 : 22 - 27
  • [9] Mechanisms for interfacial reactions between liquid Sn-3.5Ag solders and Cu substrates
    Chuang, TH
    Wu, HM
    Cheng, MD
    Chang, SY
    Yen, SF
    JOURNAL OF ELECTRONIC MATERIALS, 2004, 33 (01) : 22 - 27
  • [10] Effect of Ag on Sn-Cu and Sn-Zn lead free solders
    Alam, S. N.
    Mishra, Prerna
    Kumar, Rajnish
    MATERIALS SCIENCE-POLAND, 2015, 33 (02) : 317 - 330
12345