Non-contact detection of low carbon steel using laser generated ultrasound at high temperature

被引：14
|
作者：
Guo Ruipeng [1 ]
Wang Haitao [1 ]
Zhang Jianyan [1 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Automat Engn, 29 Jiangun Rd, Nanjing 211106, Jiangsu, Peoples R China
来源：
OPTIK | 2017年 / 136卷
关键词：
High temperature; Laser ultrasound; Surface acoustic wave; Non-contact; INSPECTION SYSTEM; BISMUTH TITANATE; TRANSDUCERS; LINE;
D O I：
10.1016/j.ijleo.2017.02.072
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
Theoretical and experimental studies on non-contact detection of high temperature metal using laser ultrasound are carried out. Based on the theory of laser ultrasound, effects of high temperature on the laser generated surface acoustic wave (SAW) are discussed. Results of simulation show that the velocity and the amplitude of SAW will decrease with the increase of the temperature. An experimental system was set up, which in a non-contact mode, by utilizing a point laser source to generate the SAW, and an interferometer to detect the SAW signal. The corresponding experimental results have verified the feasibility of the numerical simulation and the achieved result of the relationship between the velocity of SAW and the temperature. The research findings provide a potential application for online monitoring of high temperature metal. (C) 2017 Elsevier GmbH. All rights reserved.
引用
收藏
页码：536 / 542
页数：7
相关论文
共 50 条
  • [21] Non-contact physiological signal detection using continuous wave Doppler radar
    Qiao, Dengyu
    He, Tan
    Hu, Boping
    Li, Ye
    BIO-MEDICAL MATERIALS AND ENGINEERING, 2014, 24 (01) : 993 - 1000
  • [22] Detection of cracks in metal sheets using pulsed laser generated ultrasound and EMAT detection
    Dixon, S.
    Burrows, S. E.
    Dutton, B.
    Fan, Y.
    ULTRASONICS, 2011, 51 (01) : 7 - 16
  • [23] Attenuation of laser generated ultrasound in steel at high temperatures; comparison of theory and experimental measurements
    Kube, Christopher M.
    ULTRASONICS, 2016, 70 : 238 - 240
  • [24] Application of laser ultrasonic technique for non-contact detection of structural surface-breaking cracks
    Zhou, Zhenggan
    Zhang, Kuanshuang
    Zhou, Jianghua
    Sun, Guangkai
    Wang, Jie
    OPTICS AND LASER TECHNOLOGY, 2015, 73 : 173 - 178
  • [25] Non-destructive characterization of elastic properties on steel plate using laser ultrasound technique under high-temperature atmosphere
    Cheng-Hung Yeh
    N. Jeyaprakash
    Che-Hua Yang
    The International Journal of Advanced Manufacturing Technology, 2020, 108 : 129 - 141
  • [26] Non-destructive characterization of elastic properties on steel plate using laser ultrasound technique under high-temperature atmosphere
    Yeh, Cheng-Hung
    Jeyaprakash, N.
    Yang, Che-Hua
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 108 (1-2) : 129 - 141
  • [27] Non-contact interrogation of railroad axles using laser-based ultrasonic inspection
    Gonzales, K
    Kendarian, S
    Carter, D
    Smith, A
    Morgan, R
    Proceedings of the 2005 ASME/IEEE Joint Rail Conference: RESEARCH AND TESTING FOR INDUSTRY ADVANCEMENT, 2005, 29 : 145 - 150
  • [28] NON-CONTACT DYNAMIC DETECTION OF MULTI-POINT BRIDGE DEFLECTION IN HIGH FREQUENCY
    Han Jin
    Xue Nuonuo
    Wang Biyao
    Zhou Yibo
    JOURNAL OF ENVIRONMENTAL PROTECTION AND ECOLOGY, 2018, 19 (01): : 111 - 120
  • [29] Evaluation of contact versus non-contact diode laser cyclophotocoagulation for refractory glaucomas using similar energy settings
    Agarwal, HC
    Gupta, V
    Sihota, R
    CLINICAL AND EXPERIMENTAL OPHTHALMOLOGY, 2004, 32 (01) : 33 - 38
  • [30] Short-range, non-contact detection of surface contamination using Raman Lidar
    Sedlacek, AJ
    Ray, MD
    Higdon, NS
    Richter, DA
    VIBRATIONAL SPECTROSCOPY-BASED SENSOR SYSTEMS, 2002, 4577 : 95 - 104
12345