EFFECTIVE FLUORIDE ADSORPTION BY ALUMINUM OXIDE MODIFIED CLAYS: ETHIOPIAN BENTONITE VS COMMERCIAL MONTMORILLONITE

This study focuses on the chemical modification of Ethiopian bentonite and commercial montmorillonite with aluminum oxi-hydroxide (AO) for the purpose of defluoridation from aqueous solution. The chemical modification was achieved by preparing AO-modified adsorbents at different pH values. The adsorbent materials were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF) and point of zero charge (PZC). From the modified adsorbents, AO-Mont at pH 5 (AO-Mont 5) showed a slight shift of d oor at 20 = 7.5 degrees reflection toward the lower angle 20 = 7.0 degrees as a result of the Al2O3 insertion into interlayer space. The elemental composition from XRF further showed the increment of Al content accompanied with a decrease in the exchangeable cations in the modified samples and higher content of Al was observed in AO-Mont 5. In addition, the PZC initially 8.5 and 2.5 for raw bentonite and montmorillonite clays were increased to 10 and 8.5 in AO-Bent 5 and AO-Mont 5, respectively. Adsorption of fluoride on these modified adsorbents was studied as a function of preparation pH, contact time, solution pH and co-existing anions. AO-Mont prepared at pH 5, which contained higher content of Al resulted better fluoride removal performance. AO-Bent 5 and AO-Mont 5 have shown five and nine fold increase in fluoride removal capacity, respectively as compared to their respective unmodified clays. The experimental data fitted well with Freundlich adsorption isotherm model which indicated that the surface of the adsorbent is heterogeneous and adsorption of fluoride followed a multilayer sorption. Hence AO-modified Bent and Mont adsorbents prepared at pH 5 can be considered as potential adsorbents for defluoridation from drinking water.