The Effects of Molding Materials on Microstructure and Wear Behavior of A356 Alloy

被引：4
|
作者：
Yildirim, Musa [1 ]
Ozyurek, Dursun [1 ]
Tuncay, Tansel [1 ]
机构：
[1] Karabuk Univ, Technol Fac, Dept Mfg Engn, Karabuk, Turkey
来源：
HIGH TEMPERATURE MATERIALS AND PROCESSES | 2017年 / 36卷 / 05期
关键词：
A356; cooling rate; wear behavior; SI-MG ALLOYS; MECHANICAL-PROPERTIES; SLIDING WEAR; HEAT-TREATMENT; CU; TEMPERATURE; ALUMINUM; FE;
D O I：
10.1515/htmp-2015-0240
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, the effect of molding materials on microstructure and wear behavior of A356 alloy was investigated. Different microstructures were obtained by casting A356 alloy into the molds made from three different materials. Homogenization and aging heat treatments were applied as cast blocks. The aged samples were tested by pin-on-disk-type standard wear equipment. The results showed that casting into different mold materials resulted in different microstructures of A356 alloy. Microstructures of the Al-Si-Mg alloy differ depending on the mold materials. Secondary dendrite arm space (SDAS) decreased proportionally with increasing cooling rate. Based on the cooling rate, hardness values of the alloy also differ. As the cooling rate increased, hardness of the alloy increased. The SDAS increased due to the decreasing cooling rate. In wear tests, increasing weight loss was observed with decreasing cooling rate.
引用
收藏
页码：515 / 521
页数：7
相关论文
共 50 条
  • [31] Effects of solidification rate, Fe, and Ca on the cast microstructure of aluminum alloy A356
    Anyalebechi, PN
    LIGHT METALS 2003, 2003, : 1005 - 1015
  • [32] Effects of angular oscillation on semi-solid microstructure of A356 aluminum alloy
    Guo, Hong-Min
    Yang, Xiang-Jie
    Luo, Xue-Quan
    Cheng, Shang-Xu
    Wang, Ming
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2009, 19 (12): : 2106 - 2111
  • [33] High temperature mechanical and microstructural behavior of A356/15 vol% SiCp and A356 alloy
    McQueen, HJ
    Myshlyaev, M
    Konopleva, E
    Sakaris, P
    CANADIAN METALLURGICAL QUARTERLY, 1998, 37 (02) : 125 - 139
  • [34] Effects of Pouring Temperature on Microstructure and Mechanical Properties of the A356 Aluminum Alloy Diecastings
    Li, Ming
    Li, Yuandong
    Zhou, Hongwei
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2020, 23 (01):
  • [35] Effects of Zr and Y additions on microstructure and mechanical properties of cast A356 alloy
    Ye, Pengcheng
    Jiang, Feng
    Wu, Feifei
    Ye, Kai
    Fan, Yibin
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 6355 - 6365
  • [36] Effect of microstructure on mechanical properties for A356 casting alloy
    Jeong, C. Y.
    Kang, C. -S.
    Cho, J. -I.
    Oh, I. -H.
    Kim, Y. -C.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2008, 21 (1-4) : 193 - 197
  • [37] The effects of thermo-mechanical parameters on the microstructure of Thixocast A356 aluminum alloy
    Haghshenas, M.
    Zarei-Hanzaki, A.
    Fatemi-Varzaneh, S. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 480 (1-2): : 68 - 74
  • [38] Thixoforming of an ECAPed Aluminum A356 Alloy: Microstructure Evolution, Rheological Behavior, and Mechanical Properties
    Campo, Kaio Niitsu
    Zoqui, Eugenio Jose
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (04): : 1792 - 1802
  • [39] Thixoforming of an ECAPed Aluminum A356 Alloy: Microstructure Evolution, Rheological Behavior, and Mechanical Properties
    Kaio Niitsu Campo
    Eugênio José Zoqui
    Metallurgical and Materials Transactions A, 2016, 47 : 1792 - 1802
  • [40] Aging and wear characteristics of A356 alloy with Er and Zr addition
    Reihanian, M.
    Ranjbar, Khalil
    Hajizadeh, Z.
    MATERIALS SCIENCE AND TECHNOLOGY, 2023, 39 (16) : 2240 - 2255
12345