The Effects of Molding Materials on Microstructure and Wear Behavior of A356 Alloy

被引：4
|
作者：
Yildirim, Musa [1 ]
Ozyurek, Dursun [1 ]
Tuncay, Tansel [1 ]
机构：
[1] Karabuk Univ, Technol Fac, Dept Mfg Engn, Karabuk, Turkey
来源：
HIGH TEMPERATURE MATERIALS AND PROCESSES | 2017年 / 36卷 / 05期
关键词：
A356; cooling rate; wear behavior; SI-MG ALLOYS; MECHANICAL-PROPERTIES; SLIDING WEAR; HEAT-TREATMENT; CU; TEMPERATURE; ALUMINUM; FE;
D O I：
10.1515/htmp-2015-0240
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, the effect of molding materials on microstructure and wear behavior of A356 alloy was investigated. Different microstructures were obtained by casting A356 alloy into the molds made from three different materials. Homogenization and aging heat treatments were applied as cast blocks. The aged samples were tested by pin-on-disk-type standard wear equipment. The results showed that casting into different mold materials resulted in different microstructures of A356 alloy. Microstructures of the Al-Si-Mg alloy differ depending on the mold materials. Secondary dendrite arm space (SDAS) decreased proportionally with increasing cooling rate. Based on the cooling rate, hardness values of the alloy also differ. As the cooling rate increased, hardness of the alloy increased. The SDAS increased due to the decreasing cooling rate. In wear tests, increasing weight loss was observed with decreasing cooling rate.
引用
收藏
页码：515 / 521
页数：7
相关论文
共 50 条
  • [1] Influence of mould materials on wear behavior of A356 alloy
    Kanth, Y. Ravi
    Murthy, I. Narasimha
    Nagappa, S.
    Rao, J. Babu
    MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 5177 - 5182
  • [2] Effects of strontium addition on the microstructure and corrosion behavior of A356 aluminum alloy
    Ozturk, Ismail
    Agaoglu, Gokce Hapci
    Erzi, Eray
    Dispinar, Derya
    Orhan, Gokhan
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 763 : 384 - 391
  • [3] Effect of Low Voltage Pulsed Magnetic Field on microstructure and wear behavior of A356 alloy
    Zhou, W.
    Zhang, L.
    Zhou, Q.
    ADVANCES IN ENGINEERING MATERIALS AND APPLIED MECHANICS, 2016, : 677 - 681
  • [4] Effect of Cu Content on Microstructure and Wear Behaviour in A356 Alloy
    Tuncay, Tansel
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2016, 19 (04): : 585 - 592
  • [5] Wear Behavior of Cooling Slope Rheocast A356 Al Alloy
    Das, Prosenjit
    Show, Bijay K.
    Rathore, Aakash
    Samanta, Sudip K.
    TRIBOLOGY TRANSACTIONS, 2015, 58 (06) : 1054 - 1066
  • [6] Effects of Spinning on Microstructure and Mechanical Properties of A356 Alloy
    Zhao, Weimin
    Jia, Xiaofei
    Wang, Zhifeng
    Yin, Zhigao
    Xiong, Guoyuan
    MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 4014 - +
  • [7] Effect of Ni on Microstructure and Creep Behavior of A356 Aluminum Alloy
    Mohammad Varmazyar
    Shahrouz Yousefzadeh
    Mohammad Morad Sheikhi
    Metals and Materials International, 2022, 28 : 579 - 588
  • [8] Effect of Ni on Microstructure and Creep Behavior of A356 Aluminum Alloy
    Varmazyar, Mohammad
    Yousefzadeh, Shahrouz
    Morad, Sheikhi Mohammad
    METALS AND MATERIALS INTERNATIONAL, 2022, 28 (03) : 579 - 588
  • [9] Microstructure prediction in A356 alloy castings
    Han, Q
    Viswanathan, S
    LIGHT METALS 2000, 2000, : 609 - 614
  • [10] Fretting Wear Behavior of Microarc Oxidation Film on A356 Aluminum Alloy
    Sun Lu
    Li Yuandong
    Ma Ying
    Cao Chi
    Luo Xiaomei
    Qiu Jin
    RARE METAL MATERIALS AND ENGINEERING, 2024, 53 (03) : 796 - 806
12345