Analysis of the Tensile Behavior of 12 pct Mn Multi-phase (α plus γ) TWIP plus TRIP Steel by Neutron Diffraction

被引：32
作者：
Lee, Sangwon [1 ,2 ]
Woo, Wanchuck [3 ]
de Cooman, Bruno C. [2 ]
机构：
[1] Korea Inst Mat Sci, Chang Won, South Korea
[2] Pohang Univ Sci & Technol POSTECH, Grad Inst Ferrous Technol, Mat Design Lab, Pohang, South Korea
[3] Korea Atom Energy Res Inst, Div Neutron Sci, Daejeon, South Korea
来源：
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2016年 / 47A卷 / 05期
关键词：
STACKING-FAULT ENERGY; GRAIN-SIZE; MARTENSITIC-TRANSFORMATION; RETAINED AUSTENITE; PLASTICITY; DEFORMATION; MECHANISMS; ORIENTATION; FERRITE; STRESS;
D O I：
10.1007/s11661-016-3407-9
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The tensile behavior of intercritically annealed Fe-12 pctMn-0.3 pctC-2 pctAl and Fe-12 pct Mn-0.3 pctC-3 pctAl steel was studied by means of in situ neutron diffraction and microstructural analysis. The in situ neutron diffraction measurements showed that the ferrite had a much higher yield strength and lower work hardening rate as compared to the austenite. The strain hardening of the austenite was controlled by deformation twinning and strain-induced transformation, occurring in succession. This TWIP + TRIP effect acted as an effective plasticity-enhancing mechanism which increased the work hardening rate. (C) The Minerals, Metals & Materials Society and ASM International 2016
引用
收藏
页码：2125 / 2140
页数：16
相关论文
共 44 条
[1]   VOIGT-FUNCTION MODELING IN FOURIER-ANALYSIS OF SIZE-BROADENED AND STRAIN-BROADENED X-RAY-DIFFRACTION PEAKS [J].
BALZAR, D ;
LEDBETTER, H .
JOURNAL OF APPLIED CRYSTALLOGRAPHY, 1993, 26 (pt 1) :97-103
[2]   Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels [J].
Bouaziz, O. ;
Allain, S. ;
Scott, C. .
SCRIPTA MATERIALIA, 2008, 58 (06) :484-487
[3]   High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships [J].
Bouaziz, O. ;
Allain, S. ;
Scott, C. P. ;
Cugy, P. ;
Barbier, D. .
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2011, 15 (04) :141-168
[4]   Some Aspects of High Manganese Twinning-Induced Plasticity (TWIP) Steel, A Review [J].
Chen, Liqing ;
Zhao, Yang ;
Qin, Xiaomei .
ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2013, 26 (01) :1-15
[5]  
De Cooman B.C., 2013, INT S NEW DEV ADV HI, P95
[6]   Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel [J].
Dumay, A. ;
Chateau, J. -P. ;
Allain, S. ;
Migot, S. ;
Bouaziz, O. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483-84 :184-187
[7]   Strain partitioning in ultra-fine grained medium-manganese transformation induced plasticity steel [J].
Gibbs, P. J. ;
De Cooman, B. C. ;
Brown, D. W. ;
Clausen, B. ;
Schroth, J. G. ;
Merwin, M. J. ;
Matlock, D. K. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 609 :323-333
[8]   Grain size effect on strain hardening in twinning-induced plasticity steels [J].
Gutierrez-Urrutia, I. ;
Raabe, D. .
SCRIPTA MATERIALIA, 2012, 66 (12) :992-996
[9]   The effect of grain size and grain orientation on deformation twinning in a Fe-22 wt.% Mn-0.6 wt.% C TWIP steel [J].
Gutierrez-Urrutia, I. ;
Zaefferer, S. ;
Raabe, D. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (15) :3552-3560
[10]   In situ neutron diffraction study of α-γ Fe-Cr-Ni alloys under tensile deformation [J].
Harjo, S ;
Tomota, Y ;
Lukás, P ;
Neov, D ;
Vrána, M ;
Mikula, P ;
Ono, M .
ACTA MATERIALIA, 2001, 49 (13) :2471-2479
12345