Effect of FDM infill patterns on mechanical properties

被引：86

作者：

Birosz, Marton Tamas ^{[1
]}

Ledenyak, Daniel ^{[1
]}

Ando, Matyas ^{[1
]}

机构：

[1] Eotvos Lorand Univ, Savaria Inst Technol, Budapest, Hungary

来源：

POLYMER TESTING | 2022年 / 113卷

关键词：

3D printing; Infill pattern; Bending test; Additive manufacturing;

D O I：

10.1016/j.polymertesting.2022.107654

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

One of the advantage of additive manufacturing technologies is the possibility to produce hollow section products, which are lighter, cheaper, faster to create and still they can have the required mechanical properties. Most of the times a 3D printed part???s most important feature is the freedom of shape, and by setting the appropriate infill we can ensure the proper resilience as well. In this paper the different infill patterns and volume related percentages are compared by using the commercial Fused Deposition Modelling (FDM) technology. For the investigation non-standardized bending test were made with two loading orientation. From the results, the relation between the mass of the product and manufacturing time can be stated clearly, the pattern and percentage, as well as the decrease of the resilience in case the use of hollow areas in products.

引用

页数：6

共 18 条

[1]

Chaudhari M., 2018, PROCEDIA MANUF, DOI [10.1016/j.promfg.2018.02.010, DOI 10.1016/J.PROMFG.2018.02.010]

[2]

Czvikovszky T., 2000, POLIMERTECHNIKA ALAP

[3] O Mechanical characterization of 3D-printed polymers [J].

Dizon, John Ryan C. ;

Espera, Alejandro H., Jr. ;

Chen, Qiyi ;

Advincula, Rigoberto C. .

ADDITIVE MANUFACTURING, 2018, 20 :44-67

[4]

Gonzalez Rebenaque A., 2019, Procedia Manufacturing, V41, P859, DOI 10.1016/j.promfg.2019.10.008

[5]

Kalpakjian S., 2009, MANUFACTURING ENG TE, V6

[6] Augmenting effect of infill density and annealing on mechanical properties of PETG and CFPETG composites fabricated by FDM [J].

Kumar, K. Sathish ;

Soundararajan, R. ;

Shanthosh, G. ;

Saravanakumar, P. ;

Ratteesh, M. .

MATERIALS TODAY-PROCEEDINGS, 2021, 45 :2186-2191

[7]

Le L., 2022, International Journal of Lightweight Materials and Manufacture, V5, P197, DOI [10.1016/j.ijlmm.2022.01.003, DOI 10.1016/J.IJLMM.2022.01.003]

[8] The effect of infill density on the fire properties of polylactic acid 3D printed parts: A short communication [J].

Mensah, Rhoda Afriyie ;

Edstrom, David Aronsson ;

Lundberg, Oskar ;

Shanmugam, Vigneshwaran ;

Jiang, Lin ;

Qiang, Xu ;

Forsth, Michael ;

Sas, Gabriel ;

Hedenqvist, Mikael ;

Das, Oisik .

POLYMER TESTING, 2022, 111

[9] Statistical correlation between the printing angle and stress and strain of 3D printed models [J].

Mitrovic, R. ;

Miskovic, Z. ;

Ristivojevic, M. ;

Dimic, A. ;

Danko, J. ;

Bucha, J. ;

Milesich, T. .

ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY, 2018, 13 :475-482

[10] Recent review of tribology, rheology of biodegradable and FDM compatible polymers [J].

Prabhu, R. ;

Devaraju, A. .

MATERIALS TODAY-PROCEEDINGS, 2021, 39 :781-788

← 1 2 →