TiB2/AlN/Cu functionally graded materials (FGMs) fabricated by spark plasma sintering (SPS) method

被引：9
|
作者：
Jin, SZ
Zhang, HL
Li, JF [1 ]
Jia, SS
机构：
[1] Tsing Hua Univ, Dept Mat Sci & Engn, State Key Lab New Ceram & Fine Proc, Beijing 100084, Peoples R China
[2] Changchun Univ Technol, Sch Mat Sci & Engn, Changchun 130012, Peoples R China
[3] Jilin Univ, Sch Mat Sci & Engn, Changchun 130017, Peoples R China
来源：
HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2 | 2005年 / 280-283卷
关键词：
functionally graded material; TiB2/AlN/Cu; spark plasma sintering;
D O I：
10.4028/www.scientific.net/KEM.280-283.1881
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The TiB2/(TiB2+AlN)/AlN/(AlN+Cu)/Cu functionally graded materials were successfully fabricated via spark plasma sintering (SPS) method, in which a temperature gradient was achieved by using a specially designed mold and different sintering sequences were carried out. XRD analysis and SEM observations were respectively performed upon the TiB2/AlN/Cu composites. The results show that no new phases were introduced into the composites after mechanically milling or SPS process. The layered composites were found to have a dense microstructure, which changes gradually along a composition gradient. The present FGMs are developed as electrode materials of a solar thermoelectric module.
引用
收藏
页码：1881 / 1884
页数：4
相关论文
共 50 条
  • [1] Large-size WC/Co functionally graded materials fabricated by spark plasma sintering (SPS) method
    Tokita, M
    FUNCTIONALLY GRADED MATERIALS VII, 2003, 423-4 : 39 - 44
  • [2] Spark Plasma Sintering of AlN/Al Functionally Graded Materials
    Xiu, Ziyang
    Ju, Boyu
    Liu, Saiyue
    Song, Yiwei
    Du, Jindan
    Li, Zhimin
    Zhou, Chang
    Yang, Wenshu
    Wu, Gaohui
    MATERIALS, 2021, 14 (17)
  • [3] TiB2 composites fabricated by spark plasma sintering at low temperature
    Liu, Luo-Jin
    Zhang, Zhao-Hui
    Jia, Xiao-Tong
    Wang, Qiang
    Xu, Tian-Hao
    Hu, Jia-Zhao
    Cheng, Xing-Wang
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2024, 132 (03) : 121 - 127
  • [4] TiB2/Cu electrode material fabricated via SPS
    Jin, SZ
    Zhang, HL
    Jia, SS
    Li, JF
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 1555 - 1558
  • [5] Sintering behavior of fly ash/NiCr functionally graded materials prepared by spark plasma sintering (SPS)
    Daio M.
    Hasezaki K.
    Shinoda R.
    Oikawa T.
    Yoshioka I.
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2010, 57 (05): : 333 - 337
  • [6] Densification, microstructure and properties of TiB2 ceramics fabricated by spark plasma sintering
    Balci, Ozge
    Burkhardt, Ulrich
    Schmidt, Marcus
    Hennicke, Juergen
    Yagci, M. Baris
    Somer, Mehmet
    MATERIALS CHARACTERIZATION, 2018, 145 : 435 - 443
  • [7] Densification and Microstructure of Monolithic TiN and TiB2 Fabricated by Spark Plasma Sintering
    Kitiwan, Mettaya
    Ito, Akihiko
    Goto, Takashi
    MATERIALS INTEGRATION, 2012, 508 : 38 - 41
  • [8] Flash spark plasma sintering of pure TiB2
    Failla, Simone
    Fu, Shuai
    Sciti, Diletta
    Grasso, Salvatore
    OPEN CERAMICS, 2021, 5
  • [9] Spark plasma sintering of monolithic TiB2 ceramics
    Turan, Ahmet
    Sahin, Filiz Cinar
    Goller, Gultekin
    Yucel, Onuralp
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2014, 15 (06): : 464 - 468
  • [10] Spark plasma sintering of functionally graded material in the Ti-TiB2-B system
    Feng, HB
    Meng, QC
    Zhou, Y
    Jia, DC
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 397 (1-2): : 92 - 97
12345