Fault Diagnosis of Power Plant Condenser With the Optimized Deep Forest Algorithm

被引:5
作者
Ju, Yuanyuan [1 ,2 ]
Cui, Ziliang [1 ,2 ]
Xiao, Qingtai [2 ,3 ]
机构
[1] Kunming Univ Sci & Technol, Fac Sci, Kunming 650093, Yunnan, Peoples R China
[2] Kunming Univ Sci & Technol, State Key Lab Complex Nonferrous Met Resources Cl, Kunming 650093, Yunnan, Peoples R China
[3] Kunming Univ Sci & Technol, Fac Met & Energy Engn, Kunming 650093, Yunnan, Peoples R China
关键词
Fault diagnosis; Principal component analysis; Power generation; Forestry; Analytical models; Dimensionality reduction; Turbines; Condenser; deep forest; fault diagnosis; principal component analysis; power plant; COMPONENT ANALYSIS;
D O I
10.1109/ACCESS.2022.3192005
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
As an important component of power plant operation, condenser fault diagnosis plays a vital role in the safe and stable unit performance. However, the precision of most existing diagnostic methods is not high enough for condenser fault diagnosis. It is considerably difficult to diagnose a condenser fault even under various complicated conditions. In this study, a novel classification hybrid model (PCA-DF) combining the Principal Component Analysis (PCA) method with the Deep Forest (DF) model is proposed based on the motivation of improving the diagnosis accuracy of condenser fault. The algorithm of this hybrid model takes the dimension reduction result of the PCA method as the input to the DF model. The multigrained scanning structure and the dimension reduction method are considered to create a good effect. The experimental results verify the feasibility and effectiveness of this method on the historical fault sample data of the condenser. The focus on the work presented of this paper is to optimize the DF model based on PCA and study the fault diagnosis effect of the hybrid model. Results show that (1) the prediction accuracy for the condenser fault diagnosis can be improved by increasing the sample size with the PCA-DF method. (2) The accuracy of the results obtained by proposing the improved hybrid models is 1%-8% higher than the accuracy of the results obtained by directly introducing the DF model, when the proportion of test set is less than or equal to 30%. The modified hybrid models still have advantages over the DF model for a small sample. (3) With an increase in the proportion of training sets, the accuracy of the modified hybrid models is improved correspondingly from 88.18% to 99.23%. (4) Compared with the backpropagation neural network, convolutional neural network, relevance vector machine and kernel Fisher discriminant analysis model, the PCA-DF model has higher accuracy. In this study, the proposed models can eliminate the influence of autocorrelation between data, and condenser fault diagnosis based on modified models has the fastest convergence speed and best accuracy. Furthermore, the proposed novel models can be extended to more complex fault diagnosis in other fields.
引用
收藏
页码:75986 / 75997
页数:12
相关论文
共 32 条
[1]   Independent component analysis approach for fault diagnosis of condenser system in thermal power plant [J].
Ali, Ajami ;
Mahdi, Daneshvar .
JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2014, 21 (01) :242-251
[2]  
[Anonymous], 2021, IEEE Trans. Broadcast.
[3]  
Chen F, 2021, Arxiv, DOI [arXiv:2007.00596, DOI 10.48550/ARXIV.2007.00596]
[4]   Fault diagnosis based on Fisher discriminant analysis and support vector machines [J].
Chiang, LH ;
Kotanchek, ME ;
Kordon, AK .
COMPUTERS & CHEMICAL ENGINEERING, 2004, 28 (08) :1389-1401
[5]   Fault identification for process monitoring using kernel principal component analysis [J].
Cho, JH ;
Lee, JM ;
Choi, SW ;
Lee, D ;
Lee, IB .
CHEMICAL ENGINEERING SCIENCE, 2005, 60 (01) :279-288
[6]   An experimental comparison of three methods for constructing ensembles of decision trees: Bagging, boosting, and randomization [J].
Dietterich, TG .
MACHINE LEARNING, 2000, 40 (02) :139-157
[7]   Deep Forest-Based Fault Diagnosis Method for Chemical Process [J].
Ding, Jiaman ;
Luo, Qingbo ;
Jia, Lianyin ;
You, Jinguo .
MATHEMATICAL PROBLEMS IN ENGINEERING, 2020, 2020
[8]   Fault detection and diagnosis using empirical mode decomposition based principal component analysis [J].
Du, Yuncheng ;
Du, Dongping .
COMPUTERS & CHEMICAL ENGINEERING, 2018, 115 :1-21
[9]   Simultaneous Fault Detection and Diagnosis Using Adaptive Principal Component Analysis and Multivariate Contribution Analysis [J].
Elshenawy, Lamiaa M. ;
Mahmoud, Tarek A. ;
Chakour, Chouaib .
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2020, 59 (47) :20798-20815
[10]   Real-time fault detection and diagnosis using sparse principal component analysis [J].
Gajjar, Shriram ;
Kulahci, Murat ;
Palazoglu, Ahmet .
JOURNAL OF PROCESS CONTROL, 2018, 67 :112-128