The Effect of Polyurea Coating on Fatigue Life of Mild Steel

被引:5
|
作者
Mirghaderi, Hamidreza [1 ]
Ranji, Ahmad Rahbar [1 ]
Fadavie, Manochehr [1 ]
机构
[1] Amirkabir Univ Technol, Dept Maritime Engn, POB 15875-4413, Tehran, Iran
关键词
coating; fatigue test; fracture; polyurea; primer coating; DEEP CRYOGENIC TREATMENT; BEHAVIOR; RESISTANCE;
D O I
10.1007/s11665-021-05682-8
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The main objective of this study is to investigate experimentally the effect of polyurea coating on fatigue strength of grade-A marine steel (Mild steel). Some preliminary specimens are prepared by different cutting and surface finishing methods, using two types of primer. Based on roughness measurement of surface and pull-off test results, the milling method for cutting and grinding machine method for surface preparation with Rayston as a primer are used. Mechanical properties of steel and coating are determined by applying tensile tests on five specimens. The results of tensile tests show that polyurea coating is low-strength, high-ductile material with good energy absorption capability. Then thirty specimens are fabricated and high-cycle axial fatigue tests with a stress ratio of 0.05 and maximum stress as a fraction of yield stress are employed. The fatigue strength of coated specimens can be as more than 128% of uncoated specimens in high-cycle fatigue. This is due to the high absorption of energy by coating when the applied stress is in the elastic range of steel. In low cycle fatigue tests, the results of coated specimens are almost the same as for uncoated specimens. It was concluded that the type of primer has a very significant effect on the adhesion and fatigue strength of coated specimens.
引用
收藏
页码:3831 / 3844
页数:14
相关论文
共 50 条
  • [41] FATIGUE LIFE OF MILD-STEEL BEAMS UNDER INELASTIC CYCLIC AND RANDOM DEFLECTION
    SHERBOURNE, AN
    KRISHNASAMY, S
    GHAMIAN, MM
    PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS PART 2-RESEARCH AND THEORY, 1978, 65 (JUN): : 237 - 251
  • [42] Effect of anticorrosive primer coating on mild steel on the nature of underneath corrosion products
    Kumar, AVR
    Nigam, RK
    TRANSACTIONS OF THE METAL FINISHERS ASSOCIATION OF INDIA, 1998, 7 (01): : 35 - 41
  • [43] Enhancement effect of polyurea coating on the impact resistance of aluminum foam
    Guo, Hui
    Song, Fuchen
    Sun, Minqian
    Chen, Yu
    JOURNAL OF APPLIED POLYMER SCIENCE, 2023, 140 (34)
  • [44] EFFECT OF NON-METALLIC INCLUSIONS ON THE CORROSION FATIGUE OF MILD-STEEL
    RAY, GP
    JARMAN, RA
    BRITISH CORROSION JOURNAL, 1980, 15 (04): : 226 - 227
  • [45] Polypyrrole modified nickel coating on mild steel
    Tuken, Tunc
    Yazic, Birgul
    Erbil, Mehmet
    MATERIALS & DESIGN, 2007, 28 (01) : 208 - 216
  • [46] Influence of Polyurea Composite Coating on Selected Mechanical Properties of AISI 304 Steel
    Duda, Monika
    Pach, Joanna
    Lesiuk, Grzegorz
    MATERIALS, 2019, 12 (19)
  • [47] The corrosive wear of nickel coating on mild steel
    Panagopoulos, CN
    Papachristos, VD
    JOURNAL OF MATERIALS SCIENCE, 1996, 31 (11) : 2931 - 2936
  • [48] Zinc modified polypyrrole coating on mild steel
    Tuken, Tunc
    SURFACE & COATINGS TECHNOLOGY, 2006, 201 (06): : 2782 - 2790
  • [49] A new multilayer coating for mild steel protection
    Tüken, T
    Yazici, B
    Erbil, M
    PROGRESS IN ORGANIC COATINGS, 2004, 50 (02) : 115 - 122
  • [50] Effect of mean stress and ratcheting strain on fatigue life of steel
    Univ of Alberta, Edmonton, Canada
    Int J Fatigue, 5 (335-341):