A nonlinear fuzzy assisted image reconstruction algorithm for electrical capacitance tomography

被引:22
作者
Deabes, W. A. [1 ]
Abdelrahman, M. A. [1 ]
机构
[1] Tennessee Technol Univ, Dept Elect & Comp Engn, Cookeville, TN 38505 USA
关键词
Capacitance measurements; Fuzzy systems; ECT; DESIGN;
D O I
10.1016/j.isatra.2009.10.005
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
A nonlinear method based on a Fuzzy Inference System (FIS) to improve the images obtained from Electrical Capacitance Tomography (ECT) is proposed. Estimation of the molten metal characteristic in the Lost Foam Casting (LFC) process is a novel application in the area of the tomography process. The convergence rate of iterative image reconstruction techniques is dependent on the accuracy of the first image. The possibility of the existence of metal in the first image is computed by the proposed fuzzy system. This first image is passed to an iterative image reconstruction technique to get more precise images and to speed up the convergence rate. The proposed technique is able to detect the position of the metal on the periphery of the imaging area by using just eight capacitive sensors. The final results demonstrate the advantage of using the FIS compared to the performance of the iterative back projection image reconstruction technique. (C) 2009 ISA. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:10 / 18
页数:9
相关论文
共 19 条
[1]   Monitoring metal-fill in a lost foam casting process [J].
Abdelrahman, Mohamed ;
Arulanantham, Jeanison Pradeep ;
Dinwiddie, Ralph ;
Walford, Graham ;
Vondra, Fred .
ISA TRANSACTIONS, 2006, 45 (04) :459-475
[2]  
Bates C.E., 1995, Advanced lost foam casting technology
[3]  
BATURONE I, 1998, P 13 C DES CIRC INT, P316
[4]  
Deyun C., 2004, SYSTEM SIMULATION J, V16, P142
[5]  
DEYUN C, 2006, ELECT MEASUREMENT IN, V20, P22
[6]  
Donthi S., 2004, Capacitance based Tomography for industrial Applications
[7]   Visualisation of gas-oil two-phase flows in pressurised pipes using electrical capacitance tomography [J].
Gamio, JC ;
Castro, J ;
Rivera, L ;
Alamilla, J ;
Garcia-Nocetti, F ;
Aguilar, L .
FLOW MEASUREMENT AND INSTRUMENTATION, 2005, 16 (2-3) :129-134
[8]   A comparative analysis of single- and multiple-electrode excitation methods in electrical capacitance tomography [J].
Gamio, JC .
MEASUREMENT SCIENCE AND TECHNOLOGY, 2002, 13 (12) :1799-1809
[9]  
Hytros M, 1997, SENSORS AND MODELING IN MATERIALS PROCESSING: TECHNIQUES AND APPLICATIONS, P173
[10]   High-energy X-ray computed tomography of the progression of the solidification front in pure aluminum [J].
Hytros, MM ;
Jureidini, IM ;
Chun, JH ;
Lanza, RC ;
Saka, N .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (05) :1403-1409