Machinability of pearlitic cast iron with Cubic Boron Nitride (CBN) cutting tools

被引：22
|
作者：
Liu, JC [1 ]
Yamazaki, K
Ueda, H
Narutaki, N
Yamane, Y
机构：
[1] Univ Calif Davis, Dept Mech & Aeronaut Engn, IMS Mechatron Lab, Davis, CA 95616 USA
[2] Hiroshima Univ, Dept Mech Engn, Higashihiroshima 739, Japan
来源：
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME | 2002年 / 124卷 / 04期
关键词：
D O I：
10.1115/1.1511522
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to increase the accurate finishing productivity of pearlitic cast iron, face milling by CBN (Cubic Boron Nitride) cutting tools was studied The main focus of the study is the machinability investigation of pearlitic cast iron with CBN cutting tools by studying the relationships among machining conditions such as feed rate, cutting speed as well as CBN cutting tool type, tool wear workpiece surface quality, cutting forces, and cutting temperature. In addition, an emphasis is put on the effect of Al additive in pearlitic cast iron on its machinability and tool wear characteristics. High-speed milling experiments with CBN cutting tools were conducted on a vertical machining center under different machining conditions. The results obtained provide a useful understanding of milling performance by CBN cutting tools.
引用
收藏
页码：820 / 832
页数：13
相关论文
共 50 条
  • [1] INVESTIGATION OF THE MACHINING PROCESS OF SPHEROIDAL CAST IRON USING CUBIC BORON NITRIDE (CBN) TOOLS
    Grzesik, W.
    Kiszka, P.
    Kowalczyk, D.
    Zak, K.
    Rech, J.
    METALURGIJA, 2014, 53 (01): : 33 - 36
  • [2] Increasing machinability of grey cast iron using cubic boron nitride tools: Evaluation of wear mechanisms
    Cerce, Luka
    Pusavec, Franci
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2016, 23 (01) : 65 - 78
  • [3] A Study of the Influence of Cutting Parameters on Micro Milling of Steel with Cubic Boron Nitride (CBN) Tools
    Klocke, Fritz
    Quito, Fernando
    Arntz, Kristian
    Souza, Alexandre
    MICROMACHINING AND MICROFABRICATION PROCESS TECHNOLOGY XIV, 2009, 7204
  • [4] Machinability study on dry machining of white cast iron by polycrystalline cubic boron nitride inserts
    Guo, Xin
    Chen, Ling
    Zhao, Wu
    Wan, Hao
    Wen, Huiting
    Zhou, Jinming
    MACHINING SCIENCE AND TECHNOLOGY, 2022, 26 (02) : 137 - 159
  • [5] Machinability Improvement in Turning of Titanium Alloy (gr2) using Cubic Boron Nitride (cBN) Cutting Tool
    Eriki, Ananda Kumar
    Rao, K. Prahlada
    Varaprasad, K. C.
    ADVANCES IN MECHANICAL AND MANUFACTURING ENGINEERING, 2014, 564 : 507 - +
  • [6] Research on the Cutting Performance of Cubic Boron Nitride Tools
    ZHENG Xiao-hua 1
    2. School of Mechanical Engineering
    厦门大学学报(自然科学版), 2002, (S1) : 3 - 4
  • [7] Machinability of abrasion resistance cast iron with PCBN cutting tools
    Zhou, J. M.
    Andersson, M.
    MATERIALS AND MANUFACTURING PROCESSES, 2008, 23 (05) : 506 - 512
  • [8] INVESTIGATION OF THE USABILITY OF CUBIC BORON NITRIDE CUTTING TOOLS AS AN ALTERNATIVE TO DIAMOND CUTTING TOOLS
    Islak, S.
    Kir, D.
    Celik, H.
    ARCHIVES OF METALLURGY AND MATERIALS, 2013, 58 (04) : 1119 - 1123
  • [9] Comparison of tool life between ceramic and cubic boron nitride (CBN) cutting tools when machining hardened steels
    Sahin, Y.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (07) : 3478 - 3489
  • [10] Machinability studies of Peripheral Milling on Pearlitic Cast Iron
    Babu, R. Praveen
    Praveen, K.
    ADVANCED MATERIALS RESEARCH III, 2013, 685 : 86 - 91
12345