Final report on EURAMET comparison on 1 kg stainless steel mass standards

被引:0
|
作者
Alisic, S. [1 ]
Gutfeldt, B. [2 ]
Beaudoux, F. [3 ]
Bezjak, M. [4 ]
Coenegrachts, M. [5 ]
Davidson, S. [6 ]
Grgic, G. [7 ]
Hanrahan, R. [8 ]
van Geel, J. L. W. A. [9 ]
Kacmaz, S. [10 ]
Mangutova-Stoilkovska, B. [11 ]
Miteva, M. [12 ]
Navrozidis, G. [13 ]
Neuvonen, P. T. [14 ]
Nielsen, L. [15 ]
Ojanen-Saloranta, M. [16 ]
Pantic, D. [17 ]
Parn, A. [18 ]
Popa, G. F. [19 ]
Snopko, L. [20 ]
Spohr, I. [21 ]
Conceicao, P. [22 ]
Stock, M. [22 ]
Vamossy, Cs [23 ]
Wuthrich, C. [24 ]
Zandarova, T. [25 ]
Zelenka, Z. [26 ]
Zuda, J. [27 ]
AlQarni, Saud M. [28 ]
机构
[1] Inst Metrol B&H, Augusta Brauna 2, Sarajevo 71000, Bosnia & Herceg
[2] RISE Matteknik, Res Inst Sweden, Brinellgatan 4, S-50264 Boras, Sweden
[3] Lab Natl Metrol & Essais, 23 Ave Albert Bartholome, F-75015 Paris, France
[4] State Off Metrol, Ibrisimoviceva 11, Zagreb 10000, Croatia
[5] FPS Econ DG Qual & Safety, Metrol Div, Koning Albert II Laan 16, B-1000 Brussels, Belgium
[6] Natl Phys Lab, Hampton Rd, London TW11 0LW, England
[7] Metrol Inst Republ Slovenia, Grudnovo Nabrezje 17, Ljubljana 1000, Slovenia
[8] NSAI Natl Metrol Lab, Griffith Ave Extens,Glasnevin 11 E527, Dublin, Ireland
[9] VSL, Thijsseweg 11, NL-2628 JA Delft, Netherlands
[10] Ulusal Metrol Enstitusu, Gebze Yerleskesi, TR-41470 Gebze, Turkey
[11] Bur Metrol, Blvd Jane Sandanski 109a, Skopje 1000, North Macedonia
[12] Bulgarian Inst Metrol, 52B GM Dimitrov Blvd, Sofia 1040, Bulgaria
[13] Hellen Inst Metrol, Intersect NB6 & DA10 Ind Area Thessaloniki, Block 45, Thessaloniki 57022, TK, Greece
[14] Justervesenet, Fetveien 99, N-2007 Kjeller, Norway
[15] Danish Fundamental Metrol, Matematiktorvet 307, DK-2800 Lyngby, Denmark
[16] VTT Tech Res Ctr Finland Ltd, Ctr Metrol MIKES, Tekniikantie 1, Espoo 02150, Finland
[17] Directorate Measures & Precious Met, Mike Alasa 14, Beograd 11000, Serbia
[18] AS Metrosert, Teaduspargi 8, EE-12618 Tallinn, Estonia
[19] Inst Natl Metrol, Sos Vitan Barzesti 11, Bucharest 042122, Romania
[20] Slovensky Metrol Ustav, Karloveska 63, Bratislava 84255, Slovakia
[21] Inst Portugues Qualidade, Rua Antonio Giao 2, P-2829513 Caparica, Portugal
[22] Bur Int Poids & Mesures, Pavillon Breteuil, F-92312 Sevres, France
[23] Govt Off Capital City Budapest, Nemetvolgyi Ut 37-39, H-1124 Budapest, Hungary
[24] Eidgenoss Inst Metrol, Lindenweg 50, CH-3003 Bern, Switzerland
[25] Latvian Natl Metrol Ctr Ltd, K Valdemara Str 157, LV-1013 Riga, Latvia
[26] Bundesamt Eich & Vermessungswesen, Arltgasse 35, A-1160 Vienna, Austria
[27] Czech Metrol Inst, Okruzni 31, Brno 63800, Czech Republic
[28] Riyadh Al Muhammadiyah King Saud Univ, Saudi Stand Metrol & Qual Org, POB 3437, Riyadh 11471, Saudi Arabia
关键词
9;
D O I
10.1088/0026-1394/57/1A/07011
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
In order to demonstrate the equivalence in calibration of mass standards among National Metrology Institutes (NMIs) of EURAMET this key comparison (KC) on 1 kg stainless steel mass standards has been carried out under the auspices of EURAMET. The comparison was undertaken with reference to the International Prototype Kilogram (IPK) as the definition of the unit of mass. The overall result shows good consistency among the participants. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA). Export citation and abstract BibTeX RIS.
引用
收藏
页数:3
相关论文
共 50 条
  • [21] Final report on the supplementary comparison EURAMET.AUV.V-S1
    Rosenkranz P.
    Virovska D.
    Prasil M.
    Ribeiro L.F.
    Maina A.K.
    Hof C.
    Hämäläinen J.
    Bruns T.
    Sadikoglu E.
    Metrologia, 2022, 59 (1 A)
  • [22] EURAMET.QM-K12 EURAMET Key Comparison on the Determination of the Mass Fraction of Creatinine in Human Serum Final report
    Bell, D.
    Hopley, C.
    Ellison, S.
    O'Connor, G.
    Ohlendorf, R.
    Zakel, S.
    Henrion, A.
    Liu, Q.
    Peignaux, M.
    Delatour, V.
    Lampi, E.
    Kakoulides, E.
    METROLOGIA, 2013, 50
  • [23] EURAMET comparison of gauge blocks by interferometry EURAMET #1138 EURAMET.L-K1.2 Final report
    Mudronja, V.
    Katic, M.
    METROLOGIA, 2012, 49
  • [24] FINAL REPORT Supplementary Comparison DETERMINATION OF VOLUME OF STAINLESS STEEL WEIGHTS 2 kg, 1 kg, 200 g and 1 g SIMMD-S5 July 2018
    Becerra, Luis Omar
    Soto, Jhon Escobar
    Florencio, Arnaldo
    Naula, Wilson
    Cori, Luz
    Sequeira, Francisco
    METROLOGIA, 2018, 55
  • [25] Final Report EURAMET.AUV.A-S1
    Barrera-Figueroa, Salvador
    Nielsen, Lars
    METROLOGIA, 2013, 50
  • [26] Final Report of EURAMET 1197 SUPPLEMENTARY BILATERAL COMPARISON OF HYDRAULIC GAUGE PRESSURE STANDARDS UP TO 50 MPa
    Durgut, Yasin
    Petrovski, Nenad
    Kacarski, Vanco
    METROLOGIA, 2012, 49
  • [27] EURAMET comparison of 500 kg mass standard EURAMETMM-S7
    Grum, M.
    Zuda, J.
    Grgic, G.
    Nawotka, M.
    Zandarova, T.
    Parn, A.
    Kilponen, S.
    Gutfelt, B.
    Neuvonen, P. T.
    Zelenka, Z.
    Wuthrich, C.
    Panesar, M.
    Conceicao, P.
    Piree, H.
    Vamossy, C.
    Alisic, S.
    Vukoslavovic, G.
    Pantic, D.
    Mangutova-Stoilkovska, B.
    Miteva, M.
    Popa, G. F.
    METROLOGIA, 2021, 58 (1A)
  • [28] The FINAL REPORT For AFRIMETS Key Comparison (AFRIMETS.M.M-K7) of Five Stainless steel Mass Standards: 5 kg, 100 g, 10 g, 5 g and 500 mg
    Emira S.
    Sayed B.M.
    Wuethrich C.
    Souiyam S.
    Mutale D.
    Mautjana T.
    David T.
    Metrologia, 2022, 59 (1 A)
  • [29] EURAMET project No. 1046 Inter-comparison of water flow standards using electromagnetic flowmeters Final report
    Gersl, Jan
    Lojek, Libor
    METROLOGIA, 2013, 50
  • [30] A comparison of sensitivity standards in form metrology-final results of the EURAMET project 649
    Jusko, Otto
    Bosse, Harald
    Flack, David
    Hemming, Bjorn
    Pisani, Marco
    Thalmann, Ruedi
    MEASUREMENT SCIENCE AND TECHNOLOGY, 2012, 23 (05)