Properties of Jet electrodeposition Nickel Coating on TC4 Alloy Prepared by Selective Laser Melting

被引：5
作者：
Wang, Xiao [1 ]
Wang, Zhanwen [1 ]
Shen, Lida [1 ]
Xu, Mingyang [1 ]
Wang, Kai [1 ]
Tian, Zongjun [1 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Natl Key Lab Sci & Technol Helicopter Transmiss, Yu Dao St, Nanjing 210016, Jiangsu, Peoples R China
来源：
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE | 2019年 / 14卷 / 08期
基金：
中国国家自然科学基金;
关键词：
SLM; jet electrodeposition; adhesion strength; wear resistance; TITANIUM; SURFACE; MICROSTRUCTURE; BEHAVIOR;
D O I：
10.20964/2019.08.01
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
In order to solve the problems of poor surface wear resistance and low hardness of titanium alloy materials formed by selective laser melting (SLM) technology, a new method of preparing bright nickel protective coating by jet electrodeposition was proposed in this paper. The surface morphology of the coatings was characterized by field emission scanning electron microscopy. The microhardness tester, scratch tester, and friction and wear tester were used to analyze the adhesion, hardness, and wear resistance of the coatings. The results indicated that the current density has an important effect on the properties of the coatings; as the current density increases, the surface flatness gradually increases and then decreases. When the current density is 120 A/dm(2), the microhardness of the coatings reaches 548 HV, and the adhesion strength also reaches 30.4 N. Compared with the surface of titanium alloy, the surface of the coating has better wear resistance, and the surface is more complete after friction and wear test. The wear mechanism is transformed from microscopic grinding to smearing.
引用
收藏
页码：7717 / 7728
页数：12
相关论文
共 35 条
  • [1] Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: Microstructure and mechanical properties
    Baufeld, Bernd
    Van der Biest, Omer
    Gault, Rosemary
    [J]. MATERIALS & DESIGN, 2010, 31 : S106 - S111
  • [2] Electrodeposition and sliding wear resistance of nickel composite coatings containing micron and submicron SiC particles
    Garcia, I
    Fransaer, J
    Celis, JP
    [J]. SURFACE & COATINGS TECHNOLOGY, 2001, 148 (2-3) : 171 - 178
  • [3] Microstructure and performance evolution and underlying thermal mechanisms of Ni-based parts fabricated by selective laser melting
    Gu, Dongdong
    Shi, Qimin
    Lin, Kaijie
    Xi, Lixia
    [J]. ADDITIVE MANUFACTURING, 2018, 22 : 265 - 278
  • [4] Huang Z. W., 2014, DIAMOND ABRASIVERS E, V34, P40
  • [5] Selective laser melting of iron-based powder
    Kruth, JP
    Froyen, L
    Van Vaerenbergh, J
    Mercelis, P
    Rombouts, M
    Lauwers, B
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 149 (1-3) : 616 - 622
  • [6] Magnetron-sputtered Ti-Cr-Al coatings for oxidation protection of titanium alloys
    Leyens, C
    van Liere, JW
    Peters, M
    Kaysser, WA
    [J]. SURFACE & COATINGS TECHNOLOGY, 1998, 108 (1-3) : 30 - 35
  • [7] [李国宾 LI Guo-bin], 2009, [大连海事大学学报, Journal of Dalian Maritime University], V35, P90
  • [8] Long M, 2001, WEAR, V249, P158, DOI 10.1016/S0043-1648(01)00517-8
  • [9] [马胜军 Ma Shengjun], 2012, [机械工程材料, Materials for Mechanical Engineering], V36, P17
  • [10] Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting
    Murr, L. E.
    Gaytan, S. M.
    Ceylan, A.
    Martinez, E.
    Martinez, J. L.
    Hernandez, D. H.
    Machado, B. I.
    Ramirez, D. A.
    Medina, F.
    Collins, S.
    Wicker, R. B.
    [J]. ACTA MATERIALIA, 2010, 58 (05) : 1887 - 1894
1234