A review of prewhirl regulation by inlet guide vanes for compressor and pump

被引：16
作者：
Liu, Ming [1 ]
Tan, Lei [1 ]
Cao, Shuliang [1 ]
机构：
[1] Tsinghua Univ, Dept Energy & Power Engn, State Key Lab Hydrosci & Engn, Beijing 100084, Peoples R China
来源：
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY | 2019年 / 233卷 / 06期
基金：
中国国家自然科学基金;
关键词：
Compressor; pump; inlet guide vanes; prewhirl regulation; operation condition; SPEED AXIAL FAN; UNSTEADY-FLOW; IMPULSE TURBINE; PERFORMANCE; ROTOR; PRESSURE; DESIGN; TURBULENCE; SHAPE;
D O I：
10.1177/0957650918820795
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
To achieve the energy conservation and sustainable development, the prewhirl regulation by inlet guide vanes is proposed and rapidly developed for the compressor and pump. The inlet guide vanes change the flow pattern at the impeller inlet especially the velocity circulation, and then influence the performance of compressor and pump. This paper presents and discusses researches on the prewhirl regulation by inlet guide vanes. Researches include mechanism analysis of prewhirl regulation, experimental and numerical studies on the flow field, performance of compressor and pump with inlet guide vanes, influence of geometric parameters on performance of inlet guide vanes, and failure mode analysis and corresponding flow control methods.
引用
收藏
页码：803 / 817
页数：15
相关论文
共 64 条
  • [1] Ahmed S.A., 2016, Eur. J. Adv. Eng. Technol, V3, P1
  • [2] Experimental Reduction of Transonic Fan Forced Response by Inlet Guide Vane Flow Control
    Bailie, S. Todd
    Ng, Wing F.
    Copenhaver, William W.
    [J]. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2010, 132 (02):
  • [3] Boundary layer measurements on the pressure and suction sides of a turbine inlet guide vane
    Bario, F
    Beral, C
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 1998, 17 (1-2) : 1 - 9
  • [4] A computational study of the effects of inlet guide vanes on the performance of a centrifugal blood pump
    Chan, WK
    Wong, YW
    Yu, SCM
    Chua, LP
    [J]. ARTIFICIAL ORGANS, 2002, 26 (06) : 534 - 542
  • [5] Chen YN, 1999, ASME 1999 INT GAS TU
  • [6] Chen YN, 2000, ASME TURBO EXPO 2000
  • [7] Performance prediction of an industrial centrifugal compressor inlet guide vane system
    Coppinger, M
    Swain, E
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2000, 214 (A2) : 153 - 164
  • [8] Unsteady flow around suction elbow and inlet guide vanes in a centrifugal compressor
    Cui, MM
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2006, 220 (G1) : 11 - 28
  • [9] Cyrus V., 1998, ASME 1998 INT GAS TU
  • [10] Design and experimental validation of the inlet guide vane system of a mini hydraulic bulb-turbine
    Ferro, L. M. C.
    Gato, L. M. C.
    Falcao, A. F. O.
    [J]. RENEWABLE ENERGY, 2010, 35 (09) : 1920 - 1928
1234567