The influence of multilayer structure on mechanical behavior of TiN/TiAlSiN multilayer coating

被引：54
作者：
Ma, Hairui [1 ]
Miao, Qiang [1 ]
Zhang, Gaohui [2 ]
Liang, Wenping [1 ]
Wang, Yang [2 ]
Sun, Ziwang [1 ]
Lin, Hao [1 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Dept Mat Sci & Engn, Nanjing 211106, Peoples R China
[2] China Jiliang Univ, Inst Surface Phys, Hangzhou 310018, Peoples R China
来源：
CERAMICS INTERNATIONAL | 2021年 / 47卷 / 09期
基金：
中国国家自然科学基金;
关键词：
Multilayer coating; Wear; TiAlSiN; Multi-arc ion plating;
D O I：
10.1016/j.ceramint.2021.01.117
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Nitride coatings have been generally applied on light alloys like titanium and aluminium to promote their multiple performances, including hardness, thermal stability and wear resistance. In this work, TiAlSiN/TiN multilayered (ML) coating and TiAlSiN single-layer (SL) coating were deposited on TC18 (Ti5Al5Mo5V1CrFe) alloy by Multi-arc ion plating technique. The microstructure and chemical composition of the coatings were evaluated by SEM, XRD and XPS. Additionally, hardness, adhesion and wear resistance were measured through nanoindentation, scratch spectrometer and ball-on-disk tribometer. The results present that both ML and SL coating contain three main phases of TiN, Al2O3 and Si3N4. Nevertheless, the adhesion of ML coating is 62.4 N, compared to that of the SL coating is 51.8 N. The parameter H-3/E-2 as an indication of plastic deformation to evaluate wear resistance shows that the ML coating has high hardness and high toughness concurrently. The tribological study indicated that the wear rate of the ML coated specimen was 1/7 of the SL coated counterpart.
引用
收藏
页码：12583 / 12591
页数：9
相关论文
共 35 条
[1]   Structure and properties of TiSiN/Cu multilayer coatings deposited on Ti6Al4V prepared by arc ion plating [J].
Bai, Xuebing ;
Li, Jinlong ;
Zhu, Lihui .
SURFACE & COATINGS TECHNOLOGY, 2019, 372 :16-25
[2]   Superhard nanocomposite coatings of TiN/Si3N4 prepared by reactive direct current unbalanced magnetron sputtering [J].
Barshilia, Harish C. ;
Deepthi, B. ;
Prabhu, A. S. Arun ;
Rajam, K. S. .
SURFACE & COATINGS TECHNOLOGY, 2006, 201 (1-2) :329-337
[3]   Deposition and characterization of TiAlSiN nanocomposite coatings prepared by reactive pulsed direct current unbalanced magnetron sputtering [J].
Barshilia, Harish C. ;
Ghosh, Moumita ;
Shashidhara ;
Ramakrishna, Raja ;
Rajam, K. S. .
APPLIED SURFACE SCIENCE, 2010, 256 (21) :6420-6426
[4]   Optimized scratch adhesion for TiSiN coatings deposited by a combination of DC and RF sputtering [J].
Bushroa, A. R. ;
Masjuki, H. H. ;
Muhamad, M. R. ;
Beake, B. D. .
SURFACE & COATINGS TECHNOLOGY, 2011, 206 (07) :1837-1844
[5]   Machining performance of Ti-Al-Si-N coated inserts [J].
Chen, Li ;
Wang, She Q. ;
Du, Yong ;
Zhou, Shu Z. ;
Gang, Tie ;
Fen, Ji C. ;
Chang, Ke K. ;
Li, Yi W. ;
Xiong, Xiang .
SURFACE & COATINGS TECHNOLOGY, 2010, 205 (02) :582-586
[6]   Effect of multi-interfacial structure on fracture resistance of composite TiSiN/Ag/TiSiN multilayer coating [J].
Dang, Chaoqun ;
Yao, Yirong ;
Olugbade, Temitope ;
Li, Jinlong ;
Wang, Liping .
THIN SOLID FILMS, 2018, 653 :107-112
[7]   Nano mechanical and wear properties of multi-layer Ti/TiN coatings deposited on Al 7075 by high-vacuum magnetron sputtering [J].
Ghasemi, Sajjad ;
Shanaghi, Ali ;
Chu, Paul K. .
THIN SOLID FILMS, 2017, 638 :96-104
[8]   Characterization of aluminium surfaces with and without plasma nitriding by X-ray photoelectron spectroscopy [J].
Gredelj, S ;
Gerson, AR ;
Kumar, S ;
Cavallaro, GP .
APPLIED SURFACE SCIENCE, 2001, 174 (3-4) :240-250
[9]   Short-range ordering induced serrated flow in a carbon contained FeCoCrNiMn high entropy alloy [J].
Guo, Lin ;
Gu, Ji ;
Gong, Xing ;
Li, Kai ;
Ni, Song ;
Liu, Yong ;
Song, Min .
MICRON, 2019, 126
[10]   New evidences for understanding the serrated flow and shear band behavior in nanoindentation of metallic glasses [J].
Huang, Hu ;
Jiang, Minqiang ;
Yan, Jiwang .
JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 857
1234