High-Frequency Modeling and Filter Design for PWM Drives with Long Cables

被引：3

作者：

Wang, Lei ^{[1
]}

Zhang, Yifan ^{[2
]}

Ali, Muhammad Saqib ^{[1
]}

Chen, Guozhu ^{[1
]}

Guerrero, Josep M. ^{[3
]}

Vasquez, Juan C. ^{[3
]}

机构：

[1] Zhejiang Univ, Coll Elect & Engn, Hangzhou 310027, Peoples R China

[2] Zhejiang Univ, Polytech Inst, Hangzhou 310027, Peoples R China

[3] Aalborg Univ, Dept Energy Technol, Ctr Res Microgrids CROM, DK-9220 Aalborg, Denmark

来源：

ENERGIES | 2021年 / 14卷 / 04期

基金：

中国国家自然科学基金;

关键词：

cable modeling; motor drives; filter design; DM overvoltage; CM current; PWM; OVERVOLTAGE; MITIGATION; CURRENTS;

D O I：

10.3390/en14041155

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

Aiming at the problems emerging in a pulse width modulation (PWM) drive system with long cables, the accurate modeling of power cables is the premise for predicting and analyzing these relevant phenomena, and a proper filter design is the key solution to these problems. This paper proposes high-frequency cable models to represent these frequency-dependent characteristics, especially for the high-frequency resistance of cables, which is an easily overlooked factor that determines the damping of overvoltage. The proposed models can be used for accurately representing the cable characteristics in a wide frequency range, and correctly simulating the differential mode (DM) overvoltage and common mode (CM) current, including the peak value, oscillation frequency, and damping of the transient waveform. In addition, improved filter networks are proposed to suppress the DM voltage and CM current, with the merit of low losses, small volume, and excellent abilities for suppressing overvoltage. The proposed cable models and the filter design were validated in a 750 W PWM drive system with 200 m power cables.

引用

页数：18

共 22 条

[1] Overvoltage Mitigation of Inverter-Driven Motors With Long Cables of Different Lengths [J].

Akagi, Hirofumi ;

Matsumura, Itaru .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2011, 47 (04) :1741-1748

[2]

Carpaneto E., 1999, P IAS ANN M IEEE IND

[3] Methodology for cable modeling and simulation for high-frequency phenomena studies in PWM motor drives [J].

De Paula, Helder ;

de Andrade, Darizon Alves ;

Ribeiro Chaves, Marcelo Lynce ;

Domingos, Jose Luis ;

Arantes de Freitas, Marcos Antonio .

IEEE TRANSACTIONS ON POWER ELECTRONICS, 2008, 23 (02) :744-752

[4]

de Paula VC, 2015, IEEE IND APPLIC SOC

[5] New Passive Filter Design Method for Overvoltage Suppression and Bearing Currents Mitigation in a Long Cable Based PWM Inverter-Fed Motor Drive System [J].

Jiang, Yanmin ;

Wu, Weimin ;

He, Yuanbin ;

Chung, Shu-Hung ;

Blaabjerg, Frede .

IEEE TRANSACTIONS ON POWER ELECTRONICS, 2017, 32 (10) :7882-7893

[6] Determination of Parameters in the Universal Induction Motor Model [J].

Mirafzal, Behrooz ;

Skibinski, Gary L. ;

Tallam, Rangarajan M. .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2009, 45 (01) :142-151

[7] High-frequency modeling for cable and induction motor overvoltage studies in long cable drives [J].

Moreira, AF ;

Lipo, TA ;

Venkataramanan, G ;

Bernet, S .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2002, 38 (05) :1297-1306

[8]

Moreira F.A., 2006, P 2006 IEEE PES TRAN, P1

[9] Modeling and damping of high-frequency leakage currents in PWM inverter-fed AC motor drive systems [J].

Ogasawara, S ;

Akagi, H .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1996, 32 (05) :1105-1114

[10]

Pulsinelli F, 2018, INT POWER ELECT ELEC, P513, DOI 10.1109/SPEEDAM.2018.8445203

← 1 2 3 →