Fracture characteristics of thermally exposed 9Cr-1Mo steel after tensile and impact testing at room temperature

被引：60
作者：
Blach, Juraj [1 ]
Falat, Ladislav [1 ]
Sevc, Peter [1 ]
机构：
[1] Slovak Acad Sci, Inst Mat Res, Kosice 04001, Slovakia
来源：
ENGINEERING FAILURE ANALYSIS | 2009年 / 16卷 / 05期
关键词：
9Cr-1Mo steel; Thermal exposition; Microstructure; Tensile and impact properties; Fracture mode; MECHANICAL-PROPERTIES; DUCTILITY;
D O I：
10.1016/j.engfailanal.2008.09.003
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The paper deals with the fracture analysis of thermally exposed 9Cr-1Mo ferritic steel after tensile and impact testing at room temperature. The temperatures of the thermal expositions were 580, 620, and 650 degrees C, respectively. The duration of annealing experiments varied from 500 to 5000 h. The influence of thermal expositions on Vickers hardness as well as tensile properties was found to be negligible. On the other hand, remarkable effects of the annealing on room temperature impact toughness were observed. Fracture behaviour of the 9Cr-1Mo steel is strongly affected by the presence of precipitates of secondary phases. Fracture surfaces of tensile samples indicate mainly transgranular dimple fracture mechanism. By contrast, the fracture mode of the samples after impact testing is more complex. It shows both - ductile dimple tearing as well as inter-lath decohesion. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1397 / 1403
页数：7
相关论文
共 50 条
  • [21] Characterization of Creep Degradation of Modified 9Cr-1Mo Steel Using Magnetic Measurement
    Zhu, Lin
    Liu, Xinbao
    Fan, Ping
    Yang, Changlin
    Liu, Jianqiu
    [J]. JOURNAL OF TESTING AND EVALUATION, 2020, 48 (05) : 4030 - 4039
  • [22] Delta ferrite in modified 9Cr-1Mo steel weld metal
    Mahlalela, Sibusiso
    Pistorius, Pieter
    [J]. WELDING IN THE WORLD, 2025,
  • [23] Study of microstructure & mechanical properties of TIG welded aluminized 9Cr-1Mo steel
    Zala, A. B.
    Jamnapara, N., I
    Sasmal, C. S.
    Sam, S.
    Ranjan, M.
    [J]. FUSION ENGINEERING AND DESIGN, 2022, 176
  • [24] Effects of Thermal Simulation on the Creep Fracture of the Mod. 9Cr-1Mo Weld Metal
    Liao, Chien-Chun
    Wang, Chu-Chun
    Chen, Tai-Cheng
    Shiue, Ren-Kae
    Tsay, Leu-Wen
    [J]. METALS, 2020, 10 (09) : 1 - 17
  • [25] Grain refinement to improve impact toughness in 9Cr-1Mo steel through a double austenitization treatment
    Karthikeyan, T.
    Paul, V. Thomas
    Saroja, S.
    Moitra, A.
    Sasikala, G.
    Vijayalakshmi, M.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2011, 419 (1-3) : 256 - 262
  • [26] Tensile and Creep Behaviour of Modified 9Cr-1Mo steel Cladding Tube for Fast Reactor using Metallic fuel
    Latha, S.
    Nandagopal, M.
    Selvi, S. Panneer
    Laha, K.
    Mathew, M. D.
    [J]. STRUCTURAL INTEGRITY, 2014, 86 : 71 - 79
  • [27] Influence of Oxide Particles and Hardness on the Toughness of Modified 9Cr-1Mo Steel Weld Metals
    Nishikawa, Satoru
    Numakura, Kotone
    Hasegawa, Tadayuki
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (08) : 5467 - 5475
  • [28] Uniaxial creep and stress relaxation behavior of modified 9Cr-1Mo steel
    Guguloth, Krishna
    Swaminathan, J.
    Roy, Nilima
    Ghosh, R. N.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 684 : 683 - 696
  • [29] Influence of Laves phase on creep strength of modified 9Cr-1Mo steel
    Zhang, X. Z.
    Wu, X. J.
    Liu, R.
    Liu, J.
    Yao, M. X.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 706 : 279 - 286
  • [30] Zone-wise investigation of creep behaviour 9Cr-1Mo steel weld joints
    Yadav, Surya D.
    Vasantharaja, P.
    Riedlsperger, Florian
    Nagaraju, S.
    Vasudevan, M.
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2019, 35 (02) : 155 - 172
12345