An interventional approach to left ventricular assist device outflow graft obstruction

Background LVADs provide life-sustaining treatment for patients with heart failure, but their complexity allows for complications. One complication, LVAD outflow graft obstruction, may be misdiagnosed as intraluminal thrombus, when more often it is extraluminal compression from biodebris accumulation. It can often be treated endovascularly with stenting. This case series describes diagnostic and procedural techniques for the treatment of left ventricular assist device (LVAD) outflow graft obstruction. Methods We present four patients with LVADs who developed LVAD outflow graft obstruction within the bend relief-covered segment. All were initially diagnosed with computed tomographic angiography (CTA). All underwent invasive evaluation with intravascular ultrasound (IVUS), then were treated with stenting. After misdiagnosing a twist, we developed the technique of balloon "graftoplasty" to ensure suitability for stent delivery in subsequent cases. Results All patients presented with low-flow alarms and symptoms of low output, and were diagnosed with outflow graft obstruction by CTA. In all four, IVUS confirmed an extraluminal etiology. Patient 1 was treated with stenting and had a good outcome. Patient 2's obstruction was from twisting, rather than biodebris accumulation, and had sub-optimal stent expansion and ultimately required surgery. Balloon "graftoplasty" was used in subsequent cases to ensure subsequent stent expansion. Patients 3 and 4 were successfully stented. All improved after treatment. Conclusions In patients with LVAD outflow graft obstruction, IVUS can distinguish intraluminal thrombus from extraluminal compression. Balloon "graftoplasty" can ensure that the outflow graft will respond to stenting. Many cases of LVAD outflow graft obstruction should be amenable to endovascular treatment.