Analysis of effect of friction stir welding parameters on joint hardness and tensile strength of AA3003/SiC composites

被引：0

作者：

Sachinkumar ^{[1
]}

Nagamadhu, M. ^{[2
]}

Badiger, Ravindra, I ^{[3
]}

Babu, K. Anand ^{[1
]}

机构：

[1] REVA Univ, Sch Mech Engn, Bengaluru, India

[2] Acharya Inst Technol, Dept Mech Engn, Bengaluru, India

[3] Yenepoya Inst Technol, Dept Mech Engn, Mangalore, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2021年 / 45卷

关键词：

Aluminum alloy; Friction stir welding; Hardness; Tensile strength; Mechanical properties; OPTIMIZATION;

D O I：

10.1016/j.matpr.2020.10.106

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this research work 3 mm plates of AA3003/SiC is used as a parent material for friction stir welding. Experimentation was carried out using Taguchi L9 orthogonal array. Three process parameters with three levels were selected. Chosen process parameters are spindle speed, welding speed and tool load. Effect of these process parameters on mechanical properties of joints was evaluated. ANOVA study was also conducted. Results showed that the spindle speed is the major process parameters that affect the joint properties compared to welding speed and tool load. Better joint strength was obtained for spindle speed of 1000 rpm, welding speed of 90 mm/min and tool load of 3kN. (C) 2020 Elsevier Ltd. All rights reserved.

引用

页码：115 / 119

页数：5

共 7 条

[1] The optimization of friction stir welding process parameters to achieve maximum tensile strength in polyethylene sheets [J].