Evolution of the residual stress in solid oxide fuel cell during creep

被引:4
作者
Zhao, Xiang [1 ]
Lu, Yongjun [1 ]
Song, Xu [1 ]
Wang, Fenghui [1 ]
机构
[1] Northwestern Polytech Univ, Dept Engn Mech, Xian 710129, Shaanxi, Peoples R China
基金
中国国家自然科学基金;
关键词
Multilayer structure; Creep deformation; Stress; Solid oxide fuel cell; Curvature; MECHANICAL-PROPERTIES; DEFORMATION; PROBABILITY; BEHAVIOR; FAILURE; CERMETS; DAMAGE;
D O I
10.1007/s41779-018-0277-1
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The evolutions of stress in the multilayer structure of solid oxide fuel cell (SOFC) working under high temperature are calculated by an analytical model. A finite element model is established to validate the results of the present model. The results show that, the present model can be used to analyze the stress relaxation of the SOFC during creep, the stresses both in anode and electrolyte drop dramatically at the first time, but the stress in cathode is first increased and then decreased. The stress relaxation rates of the anode, electrolyte, and cathode of SOFC are 97.87%, 94.91%, and 57.36%, respectively. The creep behavior of electrolyte has little effect on the stress redistribution of the single cell, while anode as well as cathode plays an important role in the evolution of the residual stress and curvature.
引用
收藏
页码:681 / 687
页数:7
相关论文
共 50 条
  • [31] Thermal Stress Analysis of a Solid Oxide Fuel Cell Considering Interconnect Deformation
    Xu, Qi
    Wang, Chengtian
    Miao, Fuxing
    Guan, Wanbing
    Singhal, Subhash C.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2023, 170 (08)
  • [32] Effect of alumina on the curvature, Young's modulus, thermal expansion coefficient and residual stress of planar solid oxide fuel cells
    He, Chang Rong
    Wang, Wei Guo
    Wang, Jianxin
    Xue, Yejian
    JOURNAL OF POWER SOURCES, 2011, 196 (18) : 7639 - 7644
  • [33] Numerical simulation of the residual stress of solid oxide fuel cells with a three-dimensional nonplanar cathode-electrolyte interface
    Xue, Dingxi
    Du, Yufeng
    Huo, Chaoxia
    Yi, Bingyao
    Li, Guojun
    Liu, Keqin
    MODERN PHYSICS LETTERS B, 2024, 38 (34):
  • [34] Modeling of solid oxide fuel cell sintering stress and deformation
    Deng, Tao
    Xiao, Liusheng
    Sun, Kaihua
    Sun, Zaihong
    Xie, Chao
    Zhu, Jianzhong
    Han, Minfang
    Yuan, Jinliang
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2024, 265
  • [35] Using short-time creep relaxation effect to decrease the residual stress in the bonded compliant seal of planar solid oxide fuel cell - A finite element simulation
    Zhang, Yu-Cai
    Jiang, Wenchun
    Tu, Shan-Tung
    Wen, Jian-Feng
    Woo, Wanchuck
    JOURNAL OF POWER SOURCES, 2014, 255 : 108 - 115
  • [36] Effect of inhomogeneous oxidation on the mechanical degradation of anode supported solid oxide fuel cell
    Wang, Yu
    Jiang, Wenchun
    Song, Ming
    Luo, Yun
    Tu, Shan-Tung
    JOURNAL OF POWER SOURCES, 2020, 450
  • [37] Quantifying the performance evolution of solid oxide fuel cells during initial aging process
    Lyu, Zewei
    Liu, Shixue
    Wang, Yige
    Li, Hangyue
    Liu, Zhijing
    Sun, Zaihong
    Sun, Kaihua
    Zhang, Shuxing
    Han, Minfang
    JOURNAL OF POWER SOURCES, 2021, 510
  • [38] The effect of cell shape on the warpage in solid oxide fuel cells
    Azari, Khaled
    Vaghasloo, Younes Alizadeh
    Mohandesi, Jamshid Aghazadeh
    Ghobadzadeh, Amir Hosein
    JOURNAL OF POWER SOURCES, 2015, 279 : 64 - 71
  • [39] Topology optimization of the microstructure of solid oxide fuel cell cathodes
    Li, Qiangqiang
    Cao, Ganglin
    Zhang, Xiongwen
    Li, Guojun
    ACTA MATERIALIA, 2020, 201 : 278 - 285
  • [40] Finite element thermal stress analysis of solid oxide fuel cell cathode microstructures
    Vaidya, Sushrut
    Kim, Jeong-Ho
    JOURNAL OF POWER SOURCES, 2013, 225 : 269 - 276