Effects of Poly(L-lysine) Substrates on Attached Escherichia coli Bacteria

Poly(L-lysine) (PLL) is a cat ionic polymer that is often used for attaching and immoblizing class to glass Substrates for further investigation by, e.g., A FM techniques. Because of their small size, bacterial attachment is most easily done using thick air-dried PLL coatings-though thinner PLL coatings are also used and are commercially available. Nevertheless, the antimicrobial activity of PLL is well-established. Accordingly, we have investigated the physiological effects of suspended PLL and of PLL coatings on individual Escherichia coli bacteria through the pole-to-pole oscillations of cytoplasmic MinD-GFP fusion proteins. For planktonic bacteria, suspended PLL concentrations at the micromolar level quenched MinD-GFP oscillations and inhibited bacterial growth. On coverslips with PLL coatings prepared by short exposures of the slides to PLL solutions, followed by rinsing, only a fraction of available bacteria attached after hours of settling time. Min oscillations in the attached bacteria, however, were strong and only moderately slowed. On thick PLL coatings, prepared by drying drops on the slides followed by a brief rinse with deionized water, cells attached well within 15 min. With thick coatings, average oscillation periods for bacteria increased significantly, and considerable cell-to-cell variability was also observed; subsequent replacement of buffer with distilled water led to much larger period increases and/or fading Of fluorescence intensity. We demonstrate that Min oscillations are a useful metric for bacteria attached to adhesion layers. We suggest that thick PLL coatings should probably be avoided for bacterial attachment, and that even thin PLL coatings can have significant effects oil bacterial physiology.