Effect of surface modification of zirconia on cell adhesion, metabolic activity and proliferation of human osteoblasts

Titanium dental implants with sandblasted and/or acid-etched surfaces have shown clinical superiority in comparison to their smooth, machined counterparts, and are now state of the art. Sandblasting of finished, sintered zirconia implants, however, will damage the surface structure and affect the mechanical properties. To improve osseointegration of zirconia dental implants without impairing the original mechanical strength by crack initiation and partial phase transformation from tetragonal to monoclinic, roughening of the zirconia surface by sandblasting before the final sintering step was employed. Impact of the treatments on cellular reactions of SAOS-2 human osteoblast-like cells was investigated. Sandblasting of Yttrium-stabilized zirconia (Y-TZP) with 120 mu m and 250 mu m Al2O3 enhanced average roughness (Sa) from 0.28 mu m to 4.1 mu m and 5.72 mu m, respectively. Cell adhesion of SAOS-2 osteoblasts was enhanced up to 175% on sandblasted surfaces, compared to the machined zirconia reference (100%). Metabolic activity and proliferation in the logarithmic growth phase (24-48 h) were not significantly affected. Sample surface coverage by the cells after prolonged incubation (72 h) was markedly decreased on the roughened samples, indicating a shift towards increased differentiation on these surfaces. The approach investigated here to roughen zirconia implants by sandblasting before sintering shows potential to improve the clinical performance of ceramic dental implants.