Characterization of the Fe-Co-1.5V soft ferromagnetic alloy processed by Laser Engineered Net Shaping (LENS)

被引：98

作者：

Kustas, Andrew B. ^{[1
]}

Susan, Donald F. ^{[1
]}

Johnson, Kyle L. ^{[2
]}

Whetten, Shaun R. ^{[1
]}

Rodriguez, Mark A. ^{[1
]}

Dagel, Daryl J. ^{[3
]}

Michael, Joseph R. ^{[1
]}

Keicher, David M. ^{[1
]}

Argibay, Nicolas ^{[1
]}

机构：

[1] Sandia Natl Labs, Mat Phys & Chem Sci Ctr, Albuquerque, NM 87185 USA

[2] Sandia Natl Labs, Engn Sci Ctr, Albuquerque, NM 87185 USA

[3] Sandia Natl Labs, Microsyst Sci Technol & Components, Albuquerque, NM 87185 USA

来源：

ADDITIVE MANUFACTURING | 2018年 / 21卷

关键词：

Additive Manufacturing; Laser Engineered Net Shaping; Hiperco; Soft Ferromagnetic Alloys; Atomic Ordering; MAGNETIC-PROPERTIES; THERMAL-BEHAVIOR; HEAT-TRANSFER; GRAIN-REFINEMENT; PROCESS MAPS; FECO ALLOYS; PART I; MICROSTRUCTURE; STEEL; TEMPERATURE;

D O I：

10.1016/j.addma.2018.02.006

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Processing of the low workability Fe-Co-1.5V (Hiperco (R) equivalent) alloy is demonstrated using the Laser Engineered Net Shaping (LENS) metals additive manufacturing technique. As an innovative and highly localized solidification process, LENS is shown to overcome workability issues that arise during conventional thermomechanical processing, enabling the production of bulk, near net-shape forms of the Fe-Co alloy. Bulk LENS structures appeared to be ductile with no significant macroscopic defects. Atomic ordering was evaluated and significantly reduced in as-built LENS specimens relative to an annealed condition, tailorable through selection of processing parameters. Fine equiaxed grain structures were observed in as-built specimens following solidification, which then evolved toward a highly heterogeneous bimodal grain structure after annealing. The microstructure evolution in Fe-Co is discussed in the context of classical solidification theory and selective grain boundary pinning processes. Magnetic properties were also assessed and shown to fall within the extremes of conventionally processed Hiperco (R) alloys. Hiperco (R) is a registered trademark of Carpenter Technologies, Readings, PA.

引用

页码：41 / 52

页数：12

共 69 条

[1] Selective Growth of Low Stored Energy Grains During δ Sub-solvus Annealing in the Inconel 718 Nickel-Based Superalloy [J].

Agnoli, Andrea ;

Bernacki, Marc ;

Loge, Roland ;

Franchet, Jean-Michel ;

Laigo, Johanne ;

Bozzolo, Nathalie .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (09) :4405-4421

[2]

[Anonymous], 2010, ANN BOOK ASTM STAND, V04, P1, DOI [DOI 10.1520/C0940-16.2, 10.1520/C0940-16.2]

[3] Thermal process maps for predicting solidification microstructure in laser fabrication of thin-wall structures [J].

Bontha, Srikanth ;

Klingbeil, Nathan W. ;

Kobryn, Pamela A. ;

Fraser, Hamish L. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 178 (1-3) :135-142

[4]

Buckley R. A., 1979, Metal Science, V13, P67

[5]

Carpenter CarTech, 2017, HIP 50A ALL

[6]

Clegg D. W., 1973, Metal Science Journal, V7, P48

[7]

Cullity D., 2009, Introduction to Magnetic Materials, V2nd

[8]

Dantzig J.A., 2009, SOLIDIFICATION, P458

[9] Crystallographic texture engineering through novel melt strategies via electron beam melting: Inconel 718 [J].

Dehoff, R. R. ;

Kirka, M. M. ;

List, F. A., III ;

Unocic, K. A. ;

Sames, W. J. .

MATERIALS SCIENCE AND TECHNOLOGY, 2015, 31 (08) :939-944

[10] Abnormal grain growth in Al-3.5Cu [J].

Dennis, J. ;

Bate, P. S. ;

Humphreys, F. J. .

ACTA MATERIALIA, 2009, 57 (15) :4539-4547

← 1 2 3 4 5 6 7 →