INFLUENCE OF THE WORKING TECHNOLOGY ON Al-ALLOYS IN SEMI-SOLID STATE

被引：0
|
作者：
Torkar, Matjaz [1 ]
Dobersek, Mirko [1 ]
Naglic, Iztok [1 ]
机构：
[1] Inst Met & Technol, SI-1000 Ljubljana, Slovenia
来源：
MATERIALI IN TEHNOLOGIJE | 2009年 / 43卷 / 04期
关键词：
thixocasting; rheocasting; semi-solid state; microstructure; Al-alloys; MICROSTRUCTURE; EVOLUTION;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
We present two industrial technologies for working Al-alloys in the semi-solid state: thixocasting and rheocasting. The development of these processes has enabled significant progress and improved market competitiveness for the aluminium-casting industry. During both processes the share and the form of the globular solid phase are very important and they influence the flow of material in the tool. The comparison of thixocasting, rheocasting and the conventional casting process characteristics must be considered during the choice of one of these technologies. The performed investigations of rheocast components of A357 alloy revealed the important reasons for failures were the non-optimised parameters of the semi-solid working technology, the rapid opening of the tools and the non-optimised shape of the tool cavities.
引用
收藏
页码：213 / 217
页数：5
相关论文
共 50 条
  • [1] Microstructure and mechanical properties of Al alloys by semi-solid processing with LSPSF technology
    Guo, H. M.
    Yang, X. J.
    Wang, J. X.
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIII, VOL II: MODERN DESIGN THEORY AND METHODOLOGY, MEMS AND NANOTECHNOLOGY, AND MATERIAL SCIENCE AND TECHNOLOGY IN MANUFACTURING, 2009, 628-629 : 477 - +
  • [2] First stages of grain coarsening in semi-solid Al-Cu alloys
    van Boggelen, JWK
    Eskin, DG
    Katgerman, L
    SCRIPTA MATERIALIA, 2003, 49 (07) : 717 - 722
  • [3] Deformation mechanism and forming properties of 6061Al alloys during compression in semi-solid state
    Shang Shu-zhen
    Lu Gui-min
    Tang Xiao-ling
    Zhao Zu-xin
    Wu Cheng-ming
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 (09) : 1725 - 1730
  • [4] Rheological behavior of semi-solid Al-Si alloys: Effect of morphology
    Lashkari, Omid
    Ghomashchi, Reza
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 454 : 30 - 36
  • [5] Application of semi-solid forming to Mg-Zn-Al-Ca alloys
    Kamado, S
    Ikeya, N
    Rudi, RS
    Araki, T
    Kojima, Y
    MAGNESIUM ALLOYS 2000, 2000, 350-3 : 205 - 213
  • [6] Application of semi-solid forming to magnesium alloys with high Al and Zn contents
    Antara, ING
    Suzuki, K
    Kayuta, T
    Kamado, S
    Kojima, Y
    MAGNESIUM ALLOYS 2003, PTS 1 AND 2, 2003, 419-4 : 629 - 634
  • [7] In situ microtomography investigation of microstructural evolution in Al-Cu alloys during holding in semi-solid state
    Terzi, S.
    Salvo, L.
    Suery, M.
    Dahle, A.
    Boller, E.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 : S734 - S738
  • [8] In situ microtomography investigation of microstructural evolution in Al-Cu alloys during holding in semi-solid state
    S.TERZI
    L.SALVO
    M.SUERY
    A.DAHLE
    E.BOLLER
    Transactions of Nonferrous Metals Society of China, 2010, 20(S3) (S3) : 734 - 738
  • [9] Effect of slope plate variables and reheating on the semi-solid structure of Al alloys
    Ashouri, S.
    Nili-ahmadabadi, M.
    SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES, 2006, 116-117 : 201 - 204
  • [10] Alloys for Semi-Solid Processing
    Atkinson, Helen Valerie
    SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES XII, 2013, 192-193 : 16 - 27
12345