High volume fraction carbon nanotube-epoxy composites

被引：48

作者：

Spitalsky, Z. ^{[1
]}

Tsoukleri, G. ^{[1
]}

Tasis, D. ^{[2
]}

Krontiras, C. ^{[3
]}

Georga, S. N. ^{[3
]}

Galiotis, C. ^{[1
,2
]}

机构：

[1] Inst Chem Engn & High Temp Chem Proc FORTH ICEHT, Fdn Res & Technol Hellas, Patras 26504, Greece

[2] Univ Patras, Dept Mat Sci, Rion 26504, Greece

[3] Univ Patras, Dept Phys, Rion 26504, Greece

来源：

NANOTECHNOLOGY | 2009年 / 20卷 / 40期

关键词：

MECHANICAL-PROPERTIES; MODEL COMPOSITES; PAPER; NANOCOMPOSITES; FILMS; INTERCALATION; BUCKYPAPERS; FABRICATION; TENSILE; RESIN;

D O I：

10.1088/0957-4484/20/40/405702

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A versatile processing technique for fabricating epoxy nanocomposites with a high weight fraction of oxidized multi-walled carbon nanotubes is presented. Thin carbon nanotube based preforms were prepared through an oxidation-filtration protocol and then immersed in a pre-polymerized epoxy/curing agent solution in acetone. By adjusting the conditions for the oxidation of carbon nanotubes and the epoxy concentration in the as-prepared solution, high loading of graphitic nanostructures was obtained. Tensile tests indicated that the elastic modulus and strength of certain composites prepared by in situ polymerization as above were improved by 100% and 60%, respectively, compared to neat epoxy. In addition, the composite sheets showed comparable electrical conductivity values to the neat carbon nanotube paper. These results suggest that targeted chemical modification of the carbon nanotube surface is an effective way to enhance the electrical and mechanical properties of carbon nanotube-polymer composites.

引用

页数：7

共 34 条

[31] Processing and property investigation of single-walled carbon nanotube (SWNT) buckypaper/epoxy resin matrix nanocomposites [J].

Wang, Z ;

Liang, ZY ;

Wang, B ;

Zhang, C ;

Kramer, L .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2004, 35 (10) :1225-1232

[32] The feasibility of producing MWCNT paper and strong MWCNT film from VACNT array [J].

Xu, Guanghui ;

Zhang, Qiang ;

Zhou, Weiping ;

Huang, Jiaqi ;

Wei, Fei .

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2008, 92 (03) :531-539

[33] Development of novel single-wall carbon nanotube-epoxy composite ply actuators [J].

Yun, YH ;

Shanov, V ;

Schulz, MJ ;

Narasimhadevara, S ;

Subramaniam, S ;

Hurd, D ;

Boerio, FJ .

SMART MATERIALS AND STRUCTURES, 2005, 14 (06) :1526-1532

[34] Functionalization of carbon nanotubes by potassium permanganate assisted with phase transfer catalyst [J].

Zhang, NY ;

Me, J ;

Varadan, VK .

SMART MATERIALS & STRUCTURES, 2002, 11 (06) :962-965

← 1 2 3 4 →