Characterization of an integrated micro heat pipe

被引:22
|
作者
Lee, M [1 ]
Wong, M
Zohar, Y
机构
[1] Hong Kong Univ Sci & Technol, Dept Engn Mech, Kowloon, Hong Kong, Peoples R China
[2] Hong Kong Univ Sci & Technol, Dept Elect & Elect Engn, Kowloon, Hong Kong, Peoples R China
关键词
D O I
10.1088/0960-1317/13/1/309
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The characterization of a micro heat pipe system, integrated with a local heater, temperature and capacitive microsensors is presented. Two liquid charging schemes based on a single hole, requiring vacuum environment, and a pair of holes, utilizing capillary forces are compared. Taking advantage of the great disparity between the dielectric constants of liquids and gases, capacitance sensors are used for void fraction measurements. Since it is difficult to control the phase content of a liquid-gas mixture in a micro heat pipe, a calibration technique based on a traveling water-air interface due to evaporation is introduced. The integrated sensor capacitance for pure water is found to depend on measurement frequency, temperature and ion concentration, exhibiting trends that are different front previous reports. The measured temperature and void fraction distribution along the heat pipes are consistent with the two-phase flow patterns recorded during the microsystem operation.
引用
收藏
页码:58 / 64
页数:7
相关论文
共 50 条
  • [31] Heat transfer within a flat micro heat pipe with extra liquid
    Sprinceana, Siviu
    Mihai, Ioan
    ADVANCED TOPICS IN OPTOELECTRONICS, MICROELECTRONICS, AND NANOTECHNOLOGIES VIII, 2016, 10010
  • [32] Sintering technology for micro heat pipe with sintered wick
    Xi-bing Li
    Yong Tang
    Yong Li
    Shu-zhang Zhou
    Zhi-xin Zeng
    Journal of Central South University of Technology, 2010, 17 : 102 - 109
  • [33] Steady state model of a micro loop heat pipe
    Kim, J
    Golliher, E
    EIGHTEENTH ANNUAL IEEE SEMICONDUCTOR THERMAL MEASUREMENT AND MANAGEMENT SYMPOSIUM, PROCEEDINGS 2002, 2002, : 137 - 144
  • [34] Forming method of sintered wick in micro heat pipe
    Li, Xi-Bing
    Li, Yong
    Tang, Yong
    Zhou, Shu-Zhang
    2008, South China University of Technology (36):
  • [35] A novel transient thermohydraulic model of a micro heat pipe
    Jung, Eui Guk
    Boo, Joon Hong
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 140 : 819 - 827
  • [36] Sintering technology for micro heat pipe with sintered wick
    Li Xi-bing
    Tang Yong
    Li Yong
    Zhou Shu-zhang
    Zeng Zhi-xin
    JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2010, 17 (01): : 102 - 109
  • [37] Optimization of micro heat pipe radiators in a radiation environment
    Wang, Y.X.
    Peterson, G.P.
    2002, American Inst. Aeronautics and Astronautics Inc. (16)
  • [38] MICRO OSCILLATION HEAT PIPE FABRICATED ON SILICON WAFER
    Kohno, Masamichi
    Nishizono, Takashi
    Onaka, Yasunori
    Hidaka, Sumitomo
    Takahashi, Koji
    Takata, Yasuyuki
    PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS, PTS A AND B, 2008, : 1343 - 1346
  • [39] Effects of functional surface on performance of a micro heat pipe
    Qu, Jian
    Wu, Huiying
    Cheng, Ping
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2008, 35 (05) : 523 - 528
  • [40] Micro heat pipe device utilizing extended nanofluidics
    Wang, Chenxi
    Kazoe, Yutaka
    Morikawa, Kyojiro
    Shimizu, Hisashi
    Pihosh, Yuriy
    Mawatari, Kazuma
    Kitamori, Takehiko
    RSC ADVANCES, 2017, 7 (80): : 50591 - 50597