Microstructure and properties of spark plasma sintered Fe-Cr-Mo-Y-B-C bulk metallic glass

被引：54

作者：

Harimkar, Sandip P. ^{[1
]}

Paital, Sameer R. ^{[2
]}

Singh, Ashish ^{[1
]}

Aalund, Robert ^{[3
]}

Dahotre, Narendra B. ^{[2
]}

机构：

[1] Oklahoma State Univ, Sch Mech & Aerosp Engn, Stillwater, OK 74078 USA

[2] Univ Tennessee, Dept Mat Sci & Engn, Knoxville, TN 37996 USA

[3] Thermal Technol LLC, Santa Rosa, CA 95403 USA

来源：

JOURNAL OF NON-CRYSTALLINE SOLIDS | 2009年 / 355卷 / 43-44期

关键词：

Alloys; COMPOSITES; BEHAVIOR; STEEL;

D O I：

10.1016/j.jnoncrysol.2009.07.007

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Fabrication of Fe-based amorphous alloy using spark plasma sintering (SPS) process has been reported. Fully amorphous compacts with similar to 95% relative density were successfully sintered at temperature about 100 degrees C lower than glass transition temperature (T(g): 575 degrees C). Formation of crystalline Fe(23)(C, B)(6) phases within near-fully dense (similar to 99%) amorphous matrix is observed at sintering temperatures (>550 degrees C) close to glass transition temperature. Microstructure evolution in sintered compacts indicated that density, degree of crystallinity, and mechanical properties can be effectively controlled by optimizing SPS parameters. Published by Elsevier B.V.

引用

页码：2179 / 2182

页数：4

共 17 条

[1] Laser surface coating of Fe-Cr-Mo-Y-B-C bulk metallic glass composition on AISI 4140 steel [J].

Basu, A. ;

Sarnant, A. N. ;

Harirnkar, S. P. ;

Majumdar, J. Dutta ;

Manna, I. ;

Dahotre, Narendra B. .

SURFACE & COATINGS TECHNOLOGY, 2008, 202 (12) :2623-2631

[2] Spark plasma sintering of Fe-based structural amorphous metals (SAM) with Y2O3 nanoparticle additions [J].

Graeve, Olivia A. ;

Kanakala, Raghunath ;

Kaufman, Larry ;

Sinha, Kaustav ;

Wang, Enhai ;

Pearson, Brett ;

Rojas-George, Gabriel ;

Farmer, Joseph C. .

MATERIALS LETTERS, 2008, 62 (17-18) :2988-2991

[3] Indentation fracture toughness of amorphous steel [J].

Hess, PA ;

Poon, SJ ;

Shiflet, GJ ;

Dauskardt, RH .

JOURNAL OF MATERIALS RESEARCH, 2005, 20 (04) :783-786

[4]

HULBERT DM, 2008, MAT SCI ENG A-STRUCT, V1, P251

[5] A discussion on the absence of plasma in spark plasma sintering [J].

Hulbert, Dustin M. ;

Anders, Andre ;

Andersson, Joakim ;

Lavernia, Enrique J. ;

Mukherjee, Amiya K. .

SCRIPTA MATERIALIA, 2009, 60 (10) :835-838

[6] The synthesis and consolidation of hard materials by spark plasma sintering [J].

Hulbert, Dustin M. ;

Jiang, Dongtao ;

Dudina, Dina V. ;

Mukherjee, Amiya K. .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (02) :367-375

[7] Effect of Mo-Fe substitution on glass forming ability and thermal stability of Fe-C-B-Mo-Cr-W bulk amorphous alloys [J].

Khalifa, Hesham E. ;

Cheney, Justin L. ;

Vecchio, Kenneth S. .

JOURNAL OF NON-CRYSTALLINE SOLIDS, 2008, 354 (40-41) :4550-4555

[8] Effect of processing parameters on the mechanical and microstructural behavior of ultra-fine Al2O3-(ZrO2+8%Mol Y2O3) bioceramic, densified by high-frequency induction heat sintering [J].

Khalil, Khalil Abdelrazek ;

Kim, Sug Won .

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2006, 3 (04) :322-330

[9] Deformation behavior of Ni-based bulk metallic glass synthesized by spark plasma sintering [J].

Lee, J. K. ;

Kim, H. J. ;

Kim, T. S. ;

Shin, S. Y. ;

Kim, Y. C. ;

Bae, J. C. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 (801-804) :801-804

[10] Fabrication and soft-magnetic properties of Fe-B-Nb-Y glassy powder compacts by spark plasma sintering technique [J].

Lee, Sangmin ;

Kato, Hidemi ;

Kubota, Takeshi ;

Makino, Akihiro ;

Inoue, Akihisa .

INTERMETALLICS, 2009, 17 (04) :218-221

← 1 2 →