A high-resolution characterization of the oxide-metal interface in Zircaloy-4 and its relation to the oxidation and hydrogen pickup mechanisms

被引:7
作者
Sayers, James [1 ]
Lozano-Perez, Sergio [1 ]
Nicholls, Rebecca J. [1 ]
Ortner, Susan [2 ]
机构
[1] Univ Oxford, Dept Mat, Parks Rd, Oxford OX1 3PH, England
[2] Culham Sci Ctr, Natl Nucl Lab, Abingdon OX14 3DB, Oxon, England
基金
英国工程与自然科学研究理事会;
关键词
Oxidation; Zircaloy-4; Suboxide; Interface; STEM; EELS; DFT; TRANSMISSION ELECTRON-MICROSCOPY; ATOM-PROBE TOMOGRAPHY; FUEL CLADDING ALLOYS; METAL/OXIDE INTERFACE; ZIRCONIUM ALLOYS; SOLID-SOLUTIONS; ZR ALLOYS; X-RAY; CORROSION; OXYGEN;
D O I
10.1016/j.jnucmat.2019.07.008
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Oxide growth and hydrogen pickup have been measured for Zircaloy-4 in environments of different pH. The metal-oxide interface has been studied at high-resolution over sufficient lengths to show meaningful trends in the behaviour of the ZrO and oxygen-saturated metal layers (suboxides). It was found that suboxide width decreases rapidly at transition, then increases more slowly. The suboxide width is a constant proportion of the dioxide width prior to transition, but drops then increases after transition. Density functional theory was used to predict suboxide stability under different pressures. The behaviour of the suboxide can be explained on the assumption that the dioxide layer is the protective layer until it is bypassed by the environment percolating into the crack network. The relation between hydrogen pickup rate and the oxide behaviour suggests that hydrogen moves across the Zircaloy-4 oxide with no net charge, and that the role of the constrained environment within the cracked fossil oxide requires investigation. (C) 2019 Elsevier B.V. All rights reserved.
引用
收藏
页码:72 / 82
页数:11
相关论文
共 52 条
  • [41] Modelling of the mechanical behavior of the metal-oxide system during Zr alloy oxidation
    Parise, M
    Sicardy, O
    Cailletaud, G
    [J]. JOURNAL OF NUCLEAR MATERIALS, 1998, 256 (01) : 35 - 46
  • [42] Oxide microstructures of advanced Zr alloys corroded in 360°C water loop
    Park, Jeong-Yong
    Yoo, Seung Jo
    Choi, Byung-Kwon
    Jeong, Yong Hwan
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 437 (1-2) : 274 - 279
  • [43] Perkins R. A., 1991, ASTM STP, V1132
  • [44] Peters H. R., 1984, ASTM STP, V824
  • [45] A study into the impact of interface roughness development on mechanical degradation of oxides formed on zirconium alloys
    Platt, P.
    Wedge, S.
    Frankel, P.
    Gass, M.
    Howells, R.
    Preuss, M.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2015, 459 : 166 - 174
  • [46] Rickover H. G., 1975, TID26740 US EN RES D
  • [47] Sabol G. P., 2005, ASTM STP, V1467
  • [48] Sayers J., 2017, EFFECT PH HYDROGEN P
  • [49] Sayers J., 2017, P 18 INT C ENV DEGR
  • [50] Barrier oxide chemistry and hydrogen pick-up mechanisms in zirconium alloys
    Sundell, G.
    Thuvander, M.
    Andren, H. O.
    [J]. CORROSION SCIENCE, 2016, 102 : 490 - 502