Analysis and minimization of void formation during resin transfer molding process

In the resin transfer molding process, residual air in the pores of fiber preform results in dry spots and microvoids in the finished product. The dry spots are usually formed due to irregular permeability of fiber mat and improper injection locations. The microvoids result from non-uniform microarchitecture of the fiber preform, and they are transported through the gap between fiber tows during infiltration of the resin. In this study, a real-time simulation/control method was proposed to actively control the formation and the transport of air voids during the mold filling. The flow equations were solved in real time to predict the change of the flow front shape. The flow front was detected by optical sensors and the control actions were taken based on the sensor signals. Through this automated simulation/control scheme, a real-time control of resin flow could effectively avoid the dry spots and minimize the formation of microvoids by modulating the injection pressure. (c) 2005 Elsevier Ltd. All rights reserved.