Numerical determination of cutting parameters for the control of Klingelnberg spiral bevel gear geometry

被引：44

作者：

Lelkes, M ^{[1
]}

Márialigeti, A ^{[1
]}

Play, D ^{[1
]}

机构：

[1] Budapest Univ Technol & Econ, Dept Vehicle Parts & Drives, Budapest, Hungary

来源：

JOURNAL OF MECHANICAL DESIGN | 2002年 / 124卷 / 04期

关键词：

D O I：

10.1115/1.1518502

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A numerical method for the contact analysis of uniform tooth height epicyclical spiral bevel gears stemming from the Klingelnberg's Cyclo-Palloid System is proposed. The analysis is based on simultaneous generations of gear surfaces and contact simulation. A theoretical contact identification program has been developed. Conjugated tooth contact is examined. Longitudinal settings of contact patterns or contact across the surfaces from tooth root to tooth top were obtained as a function of machine-settings. The influences of each cutting parameter were isolated and were discussed.

引用

页码：761 / 771

页数：11

共 17 条

[1]

[Anonymous], 1989, NASA REFERENCE PUBLI

[2] Mathematical model of universal hypoid generator with supplemental kinematic flank correction motions [J].

Fong, ZH .

JOURNAL OF MECHANICAL DESIGN, 2000, 122 (01) :136-142

[3] KINEMATICAL OPTIMIZATION OF SPIRAL BEVEL GEARS [J].

FONG, ZH ;

TSAY, CB .

JOURNAL OF MECHANICAL DESIGN, 1992, 114 (03) :498-506

[4] Simulation and experimental measurement of the transmission error of real hypoid gears under load [J].

Gosselin, C ;

Guertin, T ;

Remond, D ;

Jean, Y .

JOURNAL OF MECHANICAL DESIGN, 2000, 122 (01) :109-122

[5] THE GENERATING SPACE FOR PARABOLIC MOTION ERROR SPIRAL BEVEL GEARS CUT BY THE GLEASON METHOD [J].

GOSSELIN, CJ ;

CLOUTIER, L .

JOURNAL OF MECHANICAL DESIGN, 1993, 115 (03) :483-489

[6]

GUINGAND M, 2000, ASME IDECT CIE 8 INT

[7] Experimental and analytical study of aerospace spiral bevel gear tooth fillet stresses [J].

Handschuh, RF ;

Bibel, GD .

JOURNAL OF MECHANICAL DESIGN, 1999, 121 (04) :565-572

[8]

HURTADO OG, 1978, THESIS RWTH AACHEN

[9]

KAVASAKI K, 1994, P 1994 INT GEAR C NE, P305

[10]

LELKES M, 2001, P JSME INT C MOT POW, V1, P375

← 1 2 →