Modelling and Analysis of Cutting Force Components in Turning Process of Commercially Pure Titanium Grade 2

被引：0

作者：

Habrat, Witold ^{[1
]}

Sala, Monika ^{[1
]}

Krolczyk, Jolanta B. ^{[2
]}

Markopoulos, Angelos P. ^{[3
]}

Legutko, Stanislaw ^{[4
]}

机构：

[1] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Rzeszow, Poland

[2] Opole Univ Technol, Fac Mech Engn, Opole, Poland

[3] Natl Tech Univ Athens, Sch Mech Engn, Athens, Greece

[4] Poznan Univ Tech, Fac Mech Engn & Management, Poznan, Poland

来源：

ADVANCES IN MANUFACTURING II, VOL 4 - MECHANICAL ENGINEERING | 2019年

关键词：

Turning process; Cutting force; RSM; Titanium Grade 2; SURFACE-TOPOGRAPHY; PARAMETERS; DRY;

D O I：

10.1007/978-3-030-16943-5_28

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work focuses on the modelling of cutting forces during turning. The purpose of the study is to determine the cutting forces of a difficult-to-cut material - commercially pure titanium Grade 2 - using the rotatable design of the experiment by RSM method. This model was validated empirically during the turning tests for various values of cutting speed, feed rate and depth of cut. Results show that the depth of cut and feed rate are the parameters which significantly influence the value of tangential and radial components of cutting forces in turning process. Moreover, the value of feed force is significantly influenced only by the depth of cut. In the adopted range, the impact of cutting speed on the cutting force components has been insignificant.

引用

页码：317 / 328

页数：12

共 18 条

[1]

Anderson M.J., 2017, STAT EASE HDB EXPT

[2]

Gorecka R., 1998, THEORY TECHNIQUE EXP

[3]

Grzesik W., 2017, ADV MACHINING PROCES

[4] EVALUATION OF THE CUTTING FORCE COMPONENTS AND THE SURFACE ROUGHNESS IN THE MILLING PROCESS OF MICRO- AND NANOCRYSTALLINE TITANIUM [J].

Habrat, W. ;

Motyka, M. ;

Topolski, K. ;

Sieniawski, J. .

ARCHIVES OF METALLURGY AND MATERIALS, 2016, 61 (03) :1033-1038

[5]

Habrat W., 2012, MECHANIK, V85

[6] Accelerated Method of Cutting Tool Quality Estimation During Milling Process of Inconel 718 Alloy [J].

Habrat, Witold ;

Krupa, Krzystof ;

Karkalos, Nikolaos E. .

ADVANCES IN MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2018, 2019, :205-212

[7] Parametric and nonparametric description of the surface topography in the dry and MQCL cutting conditions [J].

Krolczyk, G. M. ;

Maruda, R. W. ;

Krolczyk, J. B. ;

Nieslony, P. ;

Wojciechowski, S. ;

Legutko, S. .

MEASUREMENT, 2018, 121 :225-239

[8]

Krolczyk G, 2013, TEH VJESN, V20, P1077

[9] EXPERIMENTAL ANALYSIS BY MEASUREMENT OF SURFACE ROUGHNESS VARIATIONS IN TURNING PROCESS OF DUPLEX STAINLESS STEEL [J].

Krolczyk, Grzegorz M. ;

Legutko, Stanislaw .

METROLOGY AND MEASUREMENT SYSTEMS, 2014, 21 (04) :759-770

[10]

Legutko S, 2009, EKSPLOAT NIEZAWODN, P8

← 1 2 →